Research output per year
Research output per year
- 41 results
Search results
-
2023
The initial time-delay response of reflectivity changes in photoexcited two-dimensional layered semiconductor 2H-MoTe2
Fukuda, T., Fons, P., Makino, K., Saito, Y., Ueno, K., Afalla, J. & Hase, M., 2023.Research output: Contribution to conference › Paper › peer-review
-
2021
LUNAR CALIBRATION AND ITS VALIDATION FOR A MULTISPECTRAL SENSOR ONBOARD RISESAT MICROSATELLITE
Imai, M., Kurihara, J., Kouyama, T., Kuwahara, T., Fujita, S., Sakamoto, Y., Saitoh, S. I., Hirata, T., Yamamoto, H., Sato, Y. & Takahashi, Y., 2021, p. 7775-7778. 4 p.Research output: Contribution to conference › Paper › peer-review
-
2020
Application of satellite precipitation data to model the extreme rainfall-induced landslide event
Chaithong, T. & Komori, D., 2020.Research output: Contribution to conference › Paper › peer-review
3 Citations (Scopus) -
Estimating the charsteristics of woody debris mechanism in terauchi dam reservoir catchment
Yokoyama, H., Komori, D. & Chaithong, T., 2020.Research output: Contribution to conference › Paper › peer-review
-
2017
Atomic scale degradation of the initial strengthened micro texture of heat-resistant alloys under creep and fatigue loadings
Murakoshi, T., Shinozaki, T., Suzuki, K. & Miura, H., 2017, p. 409-411. 3 p.Research output: Contribution to conference › Paper › peer-review
-
Effect of three-dimensional ultrasonic assistance on milling process
Shimada, K., Iwadate, R., Mizutani, M. & Kuriyagawa, T., 2017 Nov 13.Research output: Contribution to conference › Paper › peer-review
-
Feasibility study for a virtuous material cycle in Indonesia - A cooperation between Tohoku University and the Institute of Technology Bandung
Furukawa, R., Komori, D., Fukushima, Y., Grause, G., Yoshioka, T., Chaerul, M., Sembiring, E., Damanhuri, E., Kardhana, H., Farid, M., Ariesyady, H. D. & Fujioka, Y., 2017.Research output: Contribution to conference › Paper › peer-review
-
Manufacturing of microstructures with preventing frost accretion effect: Interaction of microstructures, wettability, and ultrasonic vibration
Hasegawa, S., Shimada, K., Mizutani, M. & Kuriyagawa, T., 2017, p. 1011-1016. 6 p.Research output: Contribution to conference › Paper › peer-review
-
The effect of crystal structure on fabrication of fine periodic surface structures with short pulsed laser
Kodama, S., Suzuki, S., Shibata, A., Shimada, K., Mizutani, M. & Kuriyagawa, T., 2017, p. 1051-1056. 6 p.Research output: Contribution to conference › Paper › peer-review
-
2015
Fabrication and control of fine periodic surface structures by short pulsed laser
Kodama, S., Shibata, A., Suzuki, S., Shimada, K., Mizutani, M. & Kuriyagawa, T., 2015 Oct 18.Research output: Contribution to conference › Paper › peer-review
-
Influence of workpiece materials on the characteristics of the layers by electrical discharge coating
Sumi, N., Kato, C., Mizutani, M. & Kuriyagawa, T., 2015 Oct 18.Research output: Contribution to conference › Paper › peer-review
-
2014
Change in spatial distribution of state densities of carbon nanotubes under anisotropic strain field
Ohnishi, M., Meng, Y., Suzuki, K. & Miura, H., 2014.Research output: Contribution to conference › Paper › peer-review
6 Citations (Scopus) -
Development and operation results of cubesat RAIKO using ground network system
Sakamoto, Y., Nishio, M., Nakajo, T. & Ishimaru, R., 2014.Research output: Contribution to conference › Paper › peer-review
2 Citations (Scopus) -
Global lightning and sprite measurements from international space station
Ushio, T., Sato, M., Morimoto, T., Suzuki, M., Yamazaki, A., Hobara, Y., Kikuchi, M., Inan, U., Linscott, I., Kikuchi, H., Ishida, R., Takahashi, Y., Adachi, T., Sakamoto, Y. & Kawasaki, Z. I., 2014.Research output: Contribution to conference › Paper › peer-review
1 Citation (Scopus) -
High cycle fatigue strength of modified 9Cr-1Mo steel at elevated temperatures
Ochi, M., Nonaka, I., Suzuki, K. & Miura, H., 2014.Research output: Contribution to conference › Paper › peer-review
10 Citations (Scopus) -
Highly sensitive two dimensional tactile sensor using multi-walled carbon nanotube
Nozaki, T., Suzuki, K. & Miura, H., 2014.Research output: Contribution to conference › Paper › peer-review
3 Citations (Scopus) -
Improvement of the long-term reliability of TSV interconnections used in three-dimensional stacked modules
Miura, H. & Suzuki, K., 2014.Research output: Contribution to conference › Paper › peer-review
1 Citation (Scopus) -
Improvement of thermal conductivity of electroplated copper thin-film interconnections by controlling their micro texture
Rittinon, P., Suzuki, K. & Miura, H., 2014.Research output: Contribution to conference › Paper › peer-review
1 Citation (Scopus) -
Nanotexture change caused by strain-induced anisotropic diffusion during creep of Ni-base superalloy
Suzuki, K., Ochi, M. & Miura, H., 2014.Research output: Contribution to conference › Paper › peer-review
-
Practical collapse assessment for reinforced concrete structures based on seismic response spectrum
Matsukawa, K. & Maeda, M., 2014.Research output: Contribution to conference › Paper › peer-review
2 Citations (Scopus) -
Revision of guideline for post-earthquake damage evaluation of RC buildings In Japan
Maeda, M., Matsukawa, K. & Ito, Y., 2014.Research output: Contribution to conference › Paper › peer-review
14 Citations (Scopus) -
The effect of strain on the electronic properties of graphene nanoribbons
Yang, M., Ohnishi, M., Suzuki, K. & Miura, H., 2014.Research output: Contribution to conference › Paper › peer-review
2 Citations (Scopus) -
2013
Application of deterioration monitoring system to concrete superstructure of open-type wharf
Kato, E., Kawabata, Y. & Iwanami, M., 2013.Research output: Contribution to conference › Paper › peer-review
-
2010
Micro texture dependence of both the mechanical and electrical properties of electroplated copper thin films used for interconnection
Murat, N., Saito, N., Tamakawa, K., Suzuki, K. & Miura, H., 2010, p. 455-462. 8 p.Research output: Contribution to conference › Paper › peer-review
2 Citations (Scopus) -
Nanostructure dependence of the electronic conductivity of carbon nanotubes and graphene sheets
Ohnishi, M., Ohsaki, K., Suzuki, Y., Suzuki, K. & Miura, H., 2010, p. 437-444. 8 p.Research output: Contribution to conference › Paper › peer-review
3 Citations (Scopus) -
2009
Evaluation of corrosion wear characteristics of Co-Cr alloys with a new electrical grinding technique (EG-X)
Mizutani, M., Hisamori, N., Mizuno, T. & Ohmori, H., 2009.Research output: Contribution to conference › Paper › peer-review
-
Surface finishing and modification for cobalt-chromium-molybdenum alloy by electrolytic in-process dressing (ELID) grinding
Kotani, H., Komotori, J., Mizutani, M., Naruse, T., Katahira, K. & Ohmori, H., 2009.Research output: Contribution to conference › Paper › peer-review
3 Citations (Scopus) -
2008
Effect of interface characteristics of W/HfO2±x on electronic reliability: Quantum chemical molecular dynamics study
Suzuki, K., Inoue, T. & Miura, H., 2008, p. 357-360. 4 p.Research output: Contribution to conference › Paper › peer-review
1 Citation (Scopus) -
2007
Consistent processing and measurement procedure on micro cutting
Naruse, T., Andou, K., Kameyama, Y., Mizutani, M., Uehara, Y., Katahira, K., Lin, W., Sasaki, C. & Ohmori, H., 2007.Research output: Contribution to conference › Paper › peer-review
1 Citation (Scopus) -
Nano-precision grinding characteristics and surface modifying effects on lens mold materials
Katahira, K., Ohmori, H., Saito, T., Komotori, J. & Mizutani, M., 2007.Research output: Contribution to conference › Paper › peer-review
-
Precision grinding of the head of artificial joint (Co-Cr alloy) with a new electrical grinding system
Mizutani, M., Hisamori, N., Mizuno, T., Ohmori, H., Katahira, K. & Komotori, J., 2007.Research output: Contribution to conference › Paper › peer-review
-
2006
An identification method of a transcription factor binding site using PCR products immobilized on arrays
Kyo, M., Kamiya, T., Suzuki-Yamamoto, T., Inamori, K., Motohashi, H. & Yamamoto, M., 2006, p. 2069. 1 p.Research output: Contribution to conference › Paper › peer-review
-
Isothermal crystallization and the melting behavior of poly(L-lactic acid)
Kawai, T., Matsuba, G., Ogino, Y., Nishida, K., Kanaya, T., Nakano, M., Okamoto, H., Kawada, J. & Usuki, A., 2006, p. 830. 1 p.Research output: Contribution to conference › Paper › peer-review
-
Isothermal crystallization of poly(L-lactic acid)
Kawai, T., Matsuba, G., Ogino, Y., Nishida, K., Kanaya, T., Nakano, M., Okamoto, H., Kawada, J., Usuki, A., Nakajima, T. & Matsuda, M., 2006, p. 4475-4476. 2 p.Research output: Contribution to conference › Paper › peer-review
-
2005
Crystallization of polyethylene-co-octene
Kawai, T., Kanaya, T. & Strobl, G., 2005, p. 1204. 1 p.Research output: Contribution to conference › Paper › peer-review
-
Grinding characteristics and surface modifying effects on ELID ground biocompatible Co-Cr alloy for artificial joint
Katahira, K., Mizutani, M., Akinou, Y., Komotori, J., Ohmori, H. & Uehara, Y., 2005, p. 541-544. 4 p.Research output: Contribution to conference › Paper › peer-review
-
Improvement of adhesive strength of DLC film coated on metallic substrate by finishing condition selection
Katahira, K., Ohmori, H., Komotori, J., Mizutani, M., Maehama, F. & Iwaki, M., 2005, p. 219-224. 6 p.Research output: Contribution to conference › Paper › peer-review
-
Isothermal crystallization of poly(L-lactic acid)
Kawai, T., Matsuba, G., Ogino, Y., Nishida, K., Kanaya, T., Nakano, M., Okamoto, H., Kawada, J. & Usuki, A., 2005, p. 3143-3144. 2 p.Research output: Contribution to conference › Paper › peer-review
-
Methods for the orbit determination of tethered satellites in the project QPS
Sakamoto, Y., Yotsumoto, K., Sameshima, K., Nishio, M. & Yasaka, T., 2005, p. 3157-3164. 8 p.Research output: Contribution to conference › Paper › peer-review
-
Surface properties of bioinaterials (Ti-6A1-4V alloy) finished by a new ELID grinding system
Mizutani, M., Komotori, J., Katahira, K. & Ohmori, H., 2005, p. 213-218. 6 p.Research output: Contribution to conference › Paper › peer-review
-
2004
Kyushu university micro-satellite qtex project
Kuwahara, T., Yasaka, T., Hanada, T., Hirayama, H., Sakamoto, Y. & Itahashi, T., 2004, p. 3604-3612. 9 p.Research output: Contribution to conference › Paper › peer-review
6 Citations (Scopus)