A solar thermophotovoltaic system using spectrally controlled monolithic planar thermal emitter/absorber

Hiroo Yugami, Asaka Kohiyama, Makoto Shimizu, Fumitada Iguchi

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

Abstract

Solar-thermophotovoltaic system is expected to have high efficiency by converting wide spectral range solar energy into useful thermal radiation energy. However, the experimental STPV system shows much lower efficiency than theoretical one. To achieve high-efficiency, it is essential to obtain good spectrally matching between thermal radiation spectrum and PV cells spectral response. In this paper, the power generation tests using the whole configuration of the STPV system is described. The conversion efficiency of GaSb PV cell is estimated to be 20 to 23% against to the light intensity irradiated on the PV cell surface. The net system efficiency of 1.9% can be achieved. The application of thermal storage system to the STPV is also considered.

Original languageEnglish
Title of host publicationMicro/Nanofluidics and Lab-on-a-Chip; Nanofluids; Micro/Nanoscale Interfacial Transport Phenomena; Micro/Nanoscale Boiling and Condensation Heat Transfer; Micro/Nanoscale Thermal Radiation; Micro/Nanoscale Energy Devices and Systems
PublisherAmerican Society of Mechanical Engineers
ISBN (Electronic)9780791849651
DOIs
Publication statusPublished - 2016
EventASME 2016 5th International Conference on Micro/Nanoscale Heat and Mass Transfer, MNHMT 2016 - Biopolis, Singapore
Duration: 2016 Jan 42016 Jan 6

Publication series

NameASME 2016 5th International Conference on Micro/Nanoscale Heat and Mass Transfer, MNHMT 2016
Volume1

Other

OtherASME 2016 5th International Conference on Micro/Nanoscale Heat and Mass Transfer, MNHMT 2016
Country/TerritorySingapore
CityBiopolis
Period16/1/416/1/6

ASJC Scopus subject areas

  • Fluid Flow and Transfer Processes

Fingerprint

Dive into the research topics of 'A solar thermophotovoltaic system using spectrally controlled monolithic planar thermal emitter/absorber'. Together they form a unique fingerprint.

Cite this