Amount of hydrogen absorbed into 316L austenitic stainless steel and its correlation with properties of oxide film, dissolved oxygen concentration and low-cycle fatigue behaviors of this material in borated and lithiated high temperature water

Yida Xiong; Yutaka Watanabe; Yuki Shibayama; Nicolas Mary; Shaoyun Zhou

doi:10.1016/j.corsci.2022.110793

Amount of hydrogen absorbed into 316L austenitic stainless steel and its correlation with properties of oxide film, dissolved oxygen concentration and low-cycle fatigue behaviors of this material in borated and lithiated high temperature water

Yida Xiong, Yutaka Watanabe, Yuki Shibayama, Nicolas Mary, Shaoyun Zhou

ENG - Quantum Science and Energy Engineering

Research output: Contribution to journal › Article › peer-review

Abstract

It was found that the low-cycle fatigue (LCF) life of 316L austenitic stainless steel (ASS) in high temperature water had a negative correlation with the amount of hydrogen absorbed into the material per cycle of the LCF test. Effects of dissolved oxygen (DO) on reducing the amount of hydrogen absorbed into the materials started to appear even though only 7 ppb DO was added to the water. Instead of oxide film properties and the corrosion rate, the DO concentrations of the bulk water and the water inside the cracks were considered the key factors affecting the amount of hydrogen absorbed.

Original language	English
Article number	110793
Journal	Corrosion Science
Volume	209
DOIs	https://doi.org/10.1016/j.corsci.2022.110793
Publication status	Published - 2022 Dec

Keywords

Corrosion fatigue (C)
Hydrogen absorption (C)
Raman spectroscopy (B)
SEM (B)
Stainless steel (A)
XPS (B)

ASJC Scopus subject areas

Chemistry(all)
Chemical Engineering(all)
Materials Science(all)

Access to Document

10.1016/j.corsci.2022.110793

Fingerprint

Dive into the research topics of 'Amount of hydrogen absorbed into 316L austenitic stainless steel and its correlation with properties of oxide film, dissolved oxygen concentration and low-cycle fatigue behaviors of this material in borated and lithiated high temperature water'. Together they form a unique fingerprint.

Cite this

Xiong, Y., Watanabe, Y., Shibayama, Y., Mary, N., & Zhou, S. (2022). Amount of hydrogen absorbed into 316L austenitic stainless steel and its correlation with properties of oxide film, dissolved oxygen concentration and low-cycle fatigue behaviors of this material in borated and lithiated high temperature water. Corrosion Science, 209, [110793]. https://doi.org/10.1016/j.corsci.2022.110793

Amount of hydrogen absorbed into 316L austenitic stainless steel and its correlation with properties of oxide film, dissolved oxygen concentration and low-cycle fatigue behaviors of this material in borated and lithiated high temperature water. / Xiong, Yida; Watanabe, Yutaka; Shibayama, Yuki et al.

In: Corrosion Science, Vol. 209, 110793, 12.2022.

Research output: Contribution to journal › Article › peer-review

Xiong, Y, Watanabe, Y, Shibayama, Y, Mary, N & Zhou, S 2022, 'Amount of hydrogen absorbed into 316L austenitic stainless steel and its correlation with properties of oxide film, dissolved oxygen concentration and low-cycle fatigue behaviors of this material in borated and lithiated high temperature water', Corrosion Science, vol. 209, 110793. https://doi.org/10.1016/j.corsci.2022.110793

@article{f57701ce5cdc494c926ceba4c9bbaee5,

title = "Amount of hydrogen absorbed into 316L austenitic stainless steel and its correlation with properties of oxide film, dissolved oxygen concentration and low-cycle fatigue behaviors of this material in borated and lithiated high temperature water",

abstract = "It was found that the low-cycle fatigue (LCF) life of 316L austenitic stainless steel (ASS) in high temperature water had a negative correlation with the amount of hydrogen absorbed into the material per cycle of the LCF test. Effects of dissolved oxygen (DO) on reducing the amount of hydrogen absorbed into the materials started to appear even though only 7 ppb DO was added to the water. Instead of oxide film properties and the corrosion rate, the DO concentrations of the bulk water and the water inside the cracks were considered the key factors affecting the amount of hydrogen absorbed.",

keywords = "Corrosion fatigue (C), Hydrogen absorption (C), Raman spectroscopy (B), SEM (B), Stainless steel (A), XPS (B)",

author = "Yida Xiong and Yutaka Watanabe and Yuki Shibayama and Nicolas Mary and Shaoyun Zhou",

note = "Funding Information: The authors are grateful to Mr. Ito for his support in teaching us the operation methods of some equipment, to Mr. Tanno for his support in performing the XPS measurement. Moreover, the authors are grateful to the Tohoku University and the Watanabe Laboratory for offering scholarships to the first author. None. Publisher Copyright: {\textcopyright} 2022 Elsevier Ltd",

year = "2022",

month = dec,

doi = "10.1016/j.corsci.2022.110793",

language = "English",

volume = "209",

journal = "Corrosion Science",

issn = "0010-938X",

publisher = "Elsevier Limited",

}

TY - JOUR

T1 - Amount of hydrogen absorbed into 316L austenitic stainless steel and its correlation with properties of oxide film, dissolved oxygen concentration and low-cycle fatigue behaviors of this material in borated and lithiated high temperature water

AU - Xiong, Yida

AU - Watanabe, Yutaka

AU - Shibayama, Yuki

AU - Mary, Nicolas

AU - Zhou, Shaoyun

N1 - Funding Information: The authors are grateful to Mr. Ito for his support in teaching us the operation methods of some equipment, to Mr. Tanno for his support in performing the XPS measurement. Moreover, the authors are grateful to the Tohoku University and the Watanabe Laboratory for offering scholarships to the first author. None. Publisher Copyright: © 2022 Elsevier Ltd

PY - 2022/12

Y1 - 2022/12

N2 - It was found that the low-cycle fatigue (LCF) life of 316L austenitic stainless steel (ASS) in high temperature water had a negative correlation with the amount of hydrogen absorbed into the material per cycle of the LCF test. Effects of dissolved oxygen (DO) on reducing the amount of hydrogen absorbed into the materials started to appear even though only 7 ppb DO was added to the water. Instead of oxide film properties and the corrosion rate, the DO concentrations of the bulk water and the water inside the cracks were considered the key factors affecting the amount of hydrogen absorbed.

AB - It was found that the low-cycle fatigue (LCF) life of 316L austenitic stainless steel (ASS) in high temperature water had a negative correlation with the amount of hydrogen absorbed into the material per cycle of the LCF test. Effects of dissolved oxygen (DO) on reducing the amount of hydrogen absorbed into the materials started to appear even though only 7 ppb DO was added to the water. Instead of oxide film properties and the corrosion rate, the DO concentrations of the bulk water and the water inside the cracks were considered the key factors affecting the amount of hydrogen absorbed.

KW - Corrosion fatigue (C)

KW - Hydrogen absorption (C)

KW - Raman spectroscopy (B)

KW - SEM (B)

KW - Stainless steel (A)

KW - XPS (B)

UR - http://www.scopus.com/inward/record.url?scp=85140891699&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=85140891699&partnerID=8YFLogxK

U2 - 10.1016/j.corsci.2022.110793

DO - 10.1016/j.corsci.2022.110793

M3 - Article

AN - SCOPUS:85140891699

SN - 0010-938X

VL - 209

JO - Corrosion Science

JF - Corrosion Science

M1 - 110793

ER -

Amount of hydrogen absorbed into 316L austenitic stainless steel and its correlation with properties of oxide film, dissolved oxygen concentration and low-cycle fatigue behaviors of this material in borated and lithiated high temperature water

Abstract

Keywords

ASJC Scopus subject areas

Access to Document

Other files and links

Fingerprint

Cite this