Corrigendum: Rational Route for Increasing Intercalation Capacity of Hard Carbons as Sodium-Ion Battery Anodes(ChemSusChem, 2020, 13 10.1002/cssc.202001837)

Owing to technical issues referencing of data was faulty, giving rise to incorrect presentation of data in Tables 2 and 5 and consequently in Figure 7, which was derived using data reported in Table 5. Table 2, in which columns 3 and 4 contain the incorrect data is shown here: Table Total discharge capacity, plateau capacity and slope capacity of each HC. (Table presented.) needs to be corrected to: Table Total discharge capacity, plateau capacity and slope capacity of each HC. (Table presented.) Please note that the data for Japanese cedar had to be amended accordingly. In Table 5, the last column containing data for the crystallite interlayer area had to be changed from Table Structural properties for each HC. (Table presented.) to the following: Table Structural properties for each HC. (Table presented.) Based on the new data, the range of the x-axes in Figure 7d had to be adjusted. The old Figure 7d shows the following range: The corrected range can be seen in the following Figure 7d: The changes have no effect on scientific content or discussion. The authors apologize for this oversight and for any inconvenience caused.