Development of novel metallic glass/polymer composite materials by microwave heating in a separated H-field

Song Li; Dmitri V. Louzguine-Luzgin; Guoqiang Xie; Motoyasu Sato; Akihisa Inoue

doi:10.1016/j.matlet.2009.10.017

Development of novel metallic glass/polymer composite materials by microwave heating in a separated H-field

Song Li, Dmitri V. Louzguine-Luzgin, Guoqiang Xie, Motoyasu Sato, Akihisa Inoue

Advanced Institute for Materials Research (AIMR)

Research output: Contribution to journal › Article › peer-review

11 Citations (Scopus)

Abstract

Using a single mode 915 MHz applicator, we fabricate novel Cu₅₀Zr₄₅Al₅ metallic glass/polyphenylene sulfide (PPS) composites with high relative densities by microwave processing the constituents in a separated H-field with an applied pressure of about 5 MPa. The heating behaviors and structural changes of the composites have been investigated. A good bonding state between metallic glassy and PPS particles is found. The gradient structure is also induced by microwave heating of the composites with a high fraction of PPS phase.

Original language	English
Pages (from-to)	235-238
Number of pages	4
Journal	Materials Letters
Volume	64
Issue number	3
DOIs	https://doi.org/10.1016/j.matlet.2009.10.017
Publication status	Published - 2010 Feb 15

Keywords

Composite
Heating behavior
Metallic glass
Microwave heating

ASJC Scopus subject areas

Materials Science(all)
Condensed Matter Physics
Mechanics of Materials
Mechanical Engineering

Access to Document

10.1016/j.matlet.2009.10.017

Cite this

@article{90d9737dbbe74a5bb473afd1d03d269c,

title = "Development of novel metallic glass/polymer composite materials by microwave heating in a separated H-field",

abstract = "Using a single mode 915 MHz applicator, we fabricate novel Cu50Zr45Al5 metallic glass/polyphenylene sulfide (PPS) composites with high relative densities by microwave processing the constituents in a separated H-field with an applied pressure of about 5 MPa. The heating behaviors and structural changes of the composites have been investigated. A good bonding state between metallic glassy and PPS particles is found. The gradient structure is also induced by microwave heating of the composites with a high fraction of PPS phase.",

keywords = "Composite, Heating behavior, Metallic glass, Microwave heating",

author = "Song Li and Louzguine-Luzgin, {Dmitri V.} and Guoqiang Xie and Motoyasu Sato and Akihisa Inoue",

note = "Funding Information: The work was supported by Grant-In-Aid Priority Area on Science and Technology of Microwave-Induced, Thermally Non-Equilibrium Reaction No. 18070001 from the Ministry of Education, Sports, Culture, Science and Technology, Japan as well as the Research and Development Project on Advanced Metallic Glasses, Inorganic Materials, and Joining Technology .",

year = "2010",

month = feb,

day = "15",

doi = "10.1016/j.matlet.2009.10.017",

language = "English",

volume = "64",

pages = "235--238",

journal = "Materials Letters",

issn = "0167-577X",

publisher = "Elsevier",

number = "3",

}

TY - JOUR

T1 - Development of novel metallic glass/polymer composite materials by microwave heating in a separated H-field

AU - Li, Song

AU - Louzguine-Luzgin, Dmitri V.

AU - Xie, Guoqiang

AU - Sato, Motoyasu

AU - Inoue, Akihisa

N1 - Funding Information: The work was supported by Grant-In-Aid Priority Area on Science and Technology of Microwave-Induced, Thermally Non-Equilibrium Reaction No. 18070001 from the Ministry of Education, Sports, Culture, Science and Technology, Japan as well as the Research and Development Project on Advanced Metallic Glasses, Inorganic Materials, and Joining Technology .

PY - 2010/2/15

Y1 - 2010/2/15

N2 - Using a single mode 915 MHz applicator, we fabricate novel Cu50Zr45Al5 metallic glass/polyphenylene sulfide (PPS) composites with high relative densities by microwave processing the constituents in a separated H-field with an applied pressure of about 5 MPa. The heating behaviors and structural changes of the composites have been investigated. A good bonding state between metallic glassy and PPS particles is found. The gradient structure is also induced by microwave heating of the composites with a high fraction of PPS phase.

AB - Using a single mode 915 MHz applicator, we fabricate novel Cu50Zr45Al5 metallic glass/polyphenylene sulfide (PPS) composites with high relative densities by microwave processing the constituents in a separated H-field with an applied pressure of about 5 MPa. The heating behaviors and structural changes of the composites have been investigated. A good bonding state between metallic glassy and PPS particles is found. The gradient structure is also induced by microwave heating of the composites with a high fraction of PPS phase.

KW - Composite

KW - Heating behavior

KW - Metallic glass

KW - Microwave heating

UR - http://www.scopus.com/inward/record.url?scp=72049095386&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=72049095386&partnerID=8YFLogxK

U2 - 10.1016/j.matlet.2009.10.017

DO - 10.1016/j.matlet.2009.10.017

M3 - Article

AN - SCOPUS:72049095386

SN - 0167-577X

VL - 64

SP - 235

EP - 238

JO - Materials Letters

JF - Materials Letters

IS - 3

ER -

Development of novel metallic glass/polymer composite materials by microwave heating in a separated H-field

Abstract

Keywords

ASJC Scopus subject areas

Access to Document

Other files and links

Fingerprint

Cite this