Experimental determination of phase diagram at 450 °C in the Zn–Fe–Al ternary system

I. Lee, K. Han, I. Ohnuma, R. Kainuma

Research output: Contribution to journalArticlepeer-review

9 Citations (Scopus)


Phase equilibria in multi-phase Zn–Fe–Al alloys were experimentally measured using a field-emission electron probe micro-analyzer for alloy samples, and a precise iso-thermal phase diagram at 450 °C in the entire composition range of the Zn–Fe–Al ternary system, except for the Fe-rich corner, was determined. The ternary solubility ranges of the Γ-Fe4Zn9, Γ1-Fe21.2Zn80.8, δ1k-FeZn7, and ζ-FeZn13 on the Fe–Zn side and of the ζ-FeAl2, η-Fe2Al5, and θ-Fe4Al13 on the Fe–Al side were consistent with the latest corresponding binary data, whereas no δ1p-Fe13Zn126 phase was detected. The single-phase region of the Γ2-Fe8Zn87Al4 ternary intermetallic compound phase is significantly narrower than that reported in the previous studies. The solubility of Fe in the liquid phase increased consistently and continuously from the value in the Zn–Fe binary system (0.6 at.%) up to 1.2 at.% at 31 at.% Al with increasing Al content. In the Al-rich portion of the phase diagram at 450 °C, the Fe(Al, Zn)6 intermetallic compound phase was newly discovered, and confirmed to be an isomorph extended from the FeAl6 phase which is metastable in the Fe–Al binary system.

Original languageEnglish
Article number157163
JournalJournal of Alloys and Compounds
Publication statusPublished - 2021 Feb 15


  • A. Coating materials
  • C. Phase diagrams
  • Intermetallics
  • Phase transitions


Dive into the research topics of 'Experimental determination of phase diagram at 450 °C in the Zn–Fe–Al ternary system'. Together they form a unique fingerprint.

Cite this