Fabrication of Metamaterial Absorbers in THz Region and Evaluation of the Absorption Characteristics

Yuta Ishii; Yuma Takida; Yoshiaki Kanamori; Hiroaki Minamide; Kazuhiro Hane

doi:10.1002/ecj.11943

Fabrication of Metamaterial Absorbers in THz Region and Evaluation of the Absorption Characteristics

Yuta Ishii, Yuma Takida, Yoshiaki Kanamori, Hiroaki Minamide, Kazuhiro Hane

ENG - Finemechanics

Research output: Contribution to journal › Article › peer-review

11 Citations (Scopus)

Abstract

Metamaterial absorbers with various sizes were experimentally demonstrated in the terahertz frequency region, and their absorption characteristics were evaluated. They consist of an Au ground plate, a polyimide layer, and Au metamaterial structures. Two types of metamaterial absorbers with crossed shapes and cut-wire shapes were fabricated, respectively. For both types of metamaterials absorbers, 90% of absorption was experimentally obtained around 1.5 THz frequencies.

Original language	English
Pages (from-to)	15-24
Number of pages	10
Journal	Electronics and Communications in Japan
Volume	100
Issue number	4
DOIs	https://doi.org/10.1002/ecj.11943
Publication status	Published - 2017 Apr 1

Keywords

absorbers
metamaterial
plasmonics
terahertz

ASJC Scopus subject areas

Signal Processing
Physics and Astronomy(all)
Computer Networks and Communications
Electrical and Electronic Engineering
Applied Mathematics

Access to Document

10.1002/ecj.11943

Cite this

@article{03bd6d652af845c98e2645e7b6f55093,

title = "Fabrication of Metamaterial Absorbers in THz Region and Evaluation of the Absorption Characteristics",

abstract = "Metamaterial absorbers with various sizes were experimentally demonstrated in the terahertz frequency region, and their absorption characteristics were evaluated. They consist of an Au ground plate, a polyimide layer, and Au metamaterial structures. Two types of metamaterial absorbers with crossed shapes and cut-wire shapes were fabricated, respectively. For both types of metamaterials absorbers, 90% of absorption was experimentally obtained around 1.5 THz frequencies.",

keywords = "absorbers, metamaterial, plasmonics, terahertz",

author = "Yuta Ishii and Yuma Takida and Yoshiaki Kanamori and Hiroaki Minamide and Kazuhiro Hane",

note = "Funding Information: A part of this study was supported by Grants-in-Aid for Scientific Research (No. 25109702) and Konica Minolta Image Science Award, Konica Minolta Science and Technology Foundation. The samples were fabricated by using facilities at Micro Nanomachining Center, Tohoku University. Publisher Copyright: {\textcopyright} 2017 Wiley Periodicals, Inc. Copyright: Copyright 2017 Elsevier B.V., All rights reserved.",

year = "2017",

month = apr,

day = "1",

doi = "10.1002/ecj.11943",

language = "English",

volume = "100",

pages = "15--24",

journal = "Electronics and Communications in Japan",

issn = "1942-9533",

publisher = "Scripta Technica",

number = "4",

}

TY - JOUR

T1 - Fabrication of Metamaterial Absorbers in THz Region and Evaluation of the Absorption Characteristics

AU - Ishii, Yuta

AU - Takida, Yuma

AU - Kanamori, Yoshiaki

AU - Minamide, Hiroaki

AU - Hane, Kazuhiro

N1 - Funding Information: A part of this study was supported by Grants-in-Aid for Scientific Research (No. 25109702) and Konica Minolta Image Science Award, Konica Minolta Science and Technology Foundation. The samples were fabricated by using facilities at Micro Nanomachining Center, Tohoku University. Publisher Copyright: © 2017 Wiley Periodicals, Inc. Copyright: Copyright 2017 Elsevier B.V., All rights reserved.

PY - 2017/4/1

Y1 - 2017/4/1

N2 - Metamaterial absorbers with various sizes were experimentally demonstrated in the terahertz frequency region, and their absorption characteristics were evaluated. They consist of an Au ground plate, a polyimide layer, and Au metamaterial structures. Two types of metamaterial absorbers with crossed shapes and cut-wire shapes were fabricated, respectively. For both types of metamaterials absorbers, 90% of absorption was experimentally obtained around 1.5 THz frequencies.

AB - Metamaterial absorbers with various sizes were experimentally demonstrated in the terahertz frequency region, and their absorption characteristics were evaluated. They consist of an Au ground plate, a polyimide layer, and Au metamaterial structures. Two types of metamaterial absorbers with crossed shapes and cut-wire shapes were fabricated, respectively. For both types of metamaterials absorbers, 90% of absorption was experimentally obtained around 1.5 THz frequencies.

KW - absorbers

KW - metamaterial

KW - plasmonics

KW - terahertz

UR - http://www.scopus.com/inward/record.url?scp=85014783538&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=85014783538&partnerID=8YFLogxK

U2 - 10.1002/ecj.11943

DO - 10.1002/ecj.11943

M3 - Article

AN - SCOPUS:85014783538

SN - 1942-9533

VL - 100

SP - 15

EP - 24

JO - Electronics and Communications in Japan

JF - Electronics and Communications in Japan

IS - 4

ER -

Fabrication of Metamaterial Absorbers in THz Region and Evaluation of the Absorption Characteristics

Abstract

Keywords

ASJC Scopus subject areas

Access to Document

Other files and links

Fingerprint

Cite this