Fabrication of PDMS scaffold with controlled configurations

Taisuke Masuda; Takahisa Anada; Ichiro Takahashi; Fumihito Arai; Toshio Fukuda; Osamu Suzuki

doi:10.1109/MHS.2007.4420881

Fabrication of PDMS scaffold with controlled configurations

Taisuke Masuda, Takahisa Anada, Ichiro Takahashi, Fumihito Arai, Toshio Fukuda, Osamu Suzuki

DEN - Dental Sciences

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

1 Citation (Scopus)

Abstract

In this study, we tried to create a polydimethyl -siloxane (PDMS) scaffold with controlled pore configurations to investigate the proliferation and differentiation of the cells seeded 3-dimensionally. The three-dimensional scaffold was designed to investigate the effect of mechanical stress to the cells by utilizing the intrinsic elasticity of the PDMS. We used a combination of casting mold and lamination process to fabricate PDMS scaffold with controlled pore configuration. The lamination of each PDMS layer resulted in a construct with three-directionally interconnected micropores (600x600 [μm in section) as a PDMS body.

Original language	English
Title of host publication	2007 International Symposium on Micro-NanoMechatronics and Human Science, MHS
Pages	362-367
Number of pages	6
DOIs	https://doi.org/10.1109/MHS.2007.4420881
Publication status	Published - 2007
Event	2007 International Symposium on Micro-NanoMechatronics and Human Science, MHS - Nagoya, Japan Duration: 2007 Nov 11 → 2007 Nov 14

Publication series

Name	2007 International Symposium on Micro-NanoMechatronics and Human Science, MHS

Conference

Conference	2007 International Symposium on Micro-NanoMechatronics and Human Science, MHS
Country/Territory	Japan
City	Nagoya
Period	07/11/11 → 07/11/14

Access to Document

10.1109/MHS.2007.4420881

Cite this

Masuda, T., Anada, T., Takahashi, I., Arai, F., Fukuda, T., & Suzuki, O. (2007). Fabrication of PDMS scaffold with controlled configurations. In 2007 International Symposium on Micro-NanoMechatronics and Human Science, MHS (pp. 362-367). Article 4420881 (2007 International Symposium on Micro-NanoMechatronics and Human Science, MHS). https://doi.org/10.1109/MHS.2007.4420881

@inproceedings{20753fcdd505483bb257390d2d11fbac,

title = "Fabrication of PDMS scaffold with controlled configurations",

abstract = "In this study, we tried to create a polydimethyl -siloxane (PDMS) scaffold with controlled pore configurations to investigate the proliferation and differentiation of the cells seeded 3-dimensionally. The three-dimensional scaffold was designed to investigate the effect of mechanical stress to the cells by utilizing the intrinsic elasticity of the PDMS. We used a combination of casting mold and lamination process to fabricate PDMS scaffold with controlled pore configuration. The lamination of each PDMS layer resulted in a construct with three-directionally interconnected micropores (600x600 [μm in section) as a PDMS body.",

author = "Taisuke Masuda and Takahisa Anada and Ichiro Takahashi and Fumihito Arai and Toshio Fukuda and Osamu Suzuki",

year = "2007",

doi = "10.1109/MHS.2007.4420881",

language = "English",

isbn = "9781424418589",

series = "2007 International Symposium on Micro-NanoMechatronics and Human Science, MHS",

pages = "362--367",

booktitle = "2007 International Symposium on Micro-NanoMechatronics and Human Science, MHS",

note = "2007 International Symposium on Micro-NanoMechatronics and Human Science, MHS ; Conference date: 11-11-2007 Through 14-11-2007",

}

Masuda, T, Anada, T, Takahashi, I, Arai, F, Fukuda, T & Suzuki, O 2007, Fabrication of PDMS scaffold with controlled configurations. in 2007 International Symposium on Micro-NanoMechatronics and Human Science, MHS., 4420881, 2007 International Symposium on Micro-NanoMechatronics and Human Science, MHS, pp. 362-367, 2007 International Symposium on Micro-NanoMechatronics and Human Science, MHS, Nagoya, Japan, 07/11/11. https://doi.org/10.1109/MHS.2007.4420881

Fabrication of PDMS scaffold with controlled configurations. / Masuda, Taisuke; Anada, Takahisa; Takahashi, Ichiro et al.
2007 International Symposium on Micro-NanoMechatronics and Human Science, MHS. 2007. p. 362-367 4420881 (2007 International Symposium on Micro-NanoMechatronics and Human Science, MHS).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

TY - GEN

T1 - Fabrication of PDMS scaffold with controlled configurations

AU - Masuda, Taisuke

AU - Anada, Takahisa

AU - Takahashi, Ichiro

AU - Arai, Fumihito

AU - Fukuda, Toshio

AU - Suzuki, Osamu

PY - 2007

Y1 - 2007

N2 - In this study, we tried to create a polydimethyl -siloxane (PDMS) scaffold with controlled pore configurations to investigate the proliferation and differentiation of the cells seeded 3-dimensionally. The three-dimensional scaffold was designed to investigate the effect of mechanical stress to the cells by utilizing the intrinsic elasticity of the PDMS. We used a combination of casting mold and lamination process to fabricate PDMS scaffold with controlled pore configuration. The lamination of each PDMS layer resulted in a construct with three-directionally interconnected micropores (600x600 [μm in section) as a PDMS body.

AB - In this study, we tried to create a polydimethyl -siloxane (PDMS) scaffold with controlled pore configurations to investigate the proliferation and differentiation of the cells seeded 3-dimensionally. The three-dimensional scaffold was designed to investigate the effect of mechanical stress to the cells by utilizing the intrinsic elasticity of the PDMS. We used a combination of casting mold and lamination process to fabricate PDMS scaffold with controlled pore configuration. The lamination of each PDMS layer resulted in a construct with three-directionally interconnected micropores (600x600 [μm in section) as a PDMS body.

UR - http://www.scopus.com/inward/record.url?scp=50149110070&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=50149110070&partnerID=8YFLogxK

U2 - 10.1109/MHS.2007.4420881

DO - 10.1109/MHS.2007.4420881

M3 - Conference contribution

AN - SCOPUS:50149110070

SN - 9781424418589

T3 - 2007 International Symposium on Micro-NanoMechatronics and Human Science, MHS

SP - 362

EP - 367

BT - 2007 International Symposium on Micro-NanoMechatronics and Human Science, MHS

T2 - 2007 International Symposium on Micro-NanoMechatronics and Human Science, MHS

Y2 - 11 November 2007 through 14 November 2007

ER -

Fabrication of PDMS scaffold with controlled configurations

Abstract

Publication series

Conference

Access to Document

Other files and links

Fingerprint

Cite this