Formation and investigation of the structure and mechanical properties of bulk metallic glassy composite (Ti-Zr)-(Cu-Ni-Co) alloys with the addition of Boron

V. Yu Zadorozhnyy; A. Inoue; D. V. Louzguine-Luzgin

doi:10.1016/j.msea.2012.08.030

Formation and investigation of the structure and mechanical properties of bulk metallic glassy composite (Ti-Zr)-(Cu-Ni-Co) alloys with the addition of Boron

V. Yu Zadorozhnyy, A. Inoue, D. V. Louzguine-Luzgin

Advanced Institute for Materials Research (AIMR)

Tohoku University

Research output: Contribution to journal › Article › peer-review

7 Citations (Scopus)

Abstract

(Ti-Zr)-(Cu-Ni-Co) bulk metallic alloys containing 1000 mass ppm of boron were investigated in the present work. Taking compositional formula (Ti-Zr)_49.5+x(Cu-Ni)_49.5-xCo₁ as a basis, we increased the content of Ti and Zr elements and decreased the content of Cu and Ni with the purpose of production of crystal-glassy composites. Such a kind of approach may allow combination of high strength of glassy alloys and good plasticity of crystalline alloys in these composite materials. According to this approach a large number of the alloys of different composition and different diameters were prepared and investigated. Some of the prepared bulk glassy-crystal composite samples showes rather good properties: the compressive strength of 1800-2500MPa and compressive plasticity up to 13.5%.

Original language	English
Pages (from-to)	472-477
Number of pages	6
Journal	Materials Science & Engineering A: Structural Materials: Properties, Microstructure and Processing
Volume	558
DOIs	https://doi.org/10.1016/j.msea.2012.08.030
Publication status	Published - 2012 Dec 15

Keywords

Brittleness and ductility
Casting
Composites
Glasses
Mechanical properties at ambient temperature
Metallic

Access to Document

10.1016/j.msea.2012.08.030

Cite this

Zadorozhnyy, V. Y., Inoue, A., & Louzguine-Luzgin, D. V. (2012). Formation and investigation of the structure and mechanical properties of bulk metallic glassy composite (Ti-Zr)-(Cu-Ni-Co) alloys with the addition of Boron. Materials Science & Engineering A: Structural Materials: Properties, Microstructure and Processing, 558, 472-477. https://doi.org/10.1016/j.msea.2012.08.030

@article{40f27395aa754a24ac95e987cd74c9f8,

title = "Formation and investigation of the structure and mechanical properties of bulk metallic glassy composite (Ti-Zr)-(Cu-Ni-Co) alloys with the addition of Boron",

abstract = "(Ti-Zr)-(Cu-Ni-Co) bulk metallic alloys containing 1000 mass ppm of boron were investigated in the present work. Taking compositional formula (Ti-Zr)49.5+x(Cu-Ni)49.5-xCo1 as a basis, we increased the content of Ti and Zr elements and decreased the content of Cu and Ni with the purpose of production of crystal-glassy composites. Such a kind of approach may allow combination of high strength of glassy alloys and good plasticity of crystalline alloys in these composite materials. According to this approach a large number of the alloys of different composition and different diameters were prepared and investigated. Some of the prepared bulk glassy-crystal composite samples showes rather good properties: the compressive strength of 1800-2500MPa and compressive plasticity up to 13.5%.",

keywords = "Brittleness and ductility, Casting, Composites, Glasses, Mechanical properties at ambient temperature, Metallic",

author = "Zadorozhnyy, {V. Yu} and A. Inoue and Louzguine-Luzgin, {D. V.}",

note = "Funding Information: This work was supported by World Premier International Research Center Initiative (WPI), MEXT, Japan.",

year = "2012",

month = dec,

day = "15",

doi = "10.1016/j.msea.2012.08.030",

language = "English",

volume = "558",

pages = "472--477",

journal = "Materials Science & Engineering A: Structural Materials: Properties, Microstructure and Processing",

issn = "0921-5093",

publisher = "Elsevier BV",

}

Zadorozhnyy, VY, Inoue, A & Louzguine-Luzgin, DV 2012, 'Formation and investigation of the structure and mechanical properties of bulk metallic glassy composite (Ti-Zr)-(Cu-Ni-Co) alloys with the addition of Boron', Materials Science & Engineering A: Structural Materials: Properties, Microstructure and Processing, vol. 558, pp. 472-477. https://doi.org/10.1016/j.msea.2012.08.030

Formation and investigation of the structure and mechanical properties of bulk metallic glassy composite (Ti-Zr)-(Cu-Ni-Co) alloys with the addition of Boron. / Zadorozhnyy, V. Yu; Inoue, A.; Louzguine-Luzgin, D. V.
In: Materials Science & Engineering A: Structural Materials: Properties, Microstructure and Processing, Vol. 558, 15.12.2012, p. 472-477.

Research output: Contribution to journal › Article › peer-review

TY - JOUR

T1 - Formation and investigation of the structure and mechanical properties of bulk metallic glassy composite (Ti-Zr)-(Cu-Ni-Co) alloys with the addition of Boron

AU - Zadorozhnyy, V. Yu

AU - Inoue, A.

AU - Louzguine-Luzgin, D. V.

N1 - Funding Information: This work was supported by World Premier International Research Center Initiative (WPI), MEXT, Japan.

PY - 2012/12/15

Y1 - 2012/12/15

N2 - (Ti-Zr)-(Cu-Ni-Co) bulk metallic alloys containing 1000 mass ppm of boron were investigated in the present work. Taking compositional formula (Ti-Zr)49.5+x(Cu-Ni)49.5-xCo1 as a basis, we increased the content of Ti and Zr elements and decreased the content of Cu and Ni with the purpose of production of crystal-glassy composites. Such a kind of approach may allow combination of high strength of glassy alloys and good plasticity of crystalline alloys in these composite materials. According to this approach a large number of the alloys of different composition and different diameters were prepared and investigated. Some of the prepared bulk glassy-crystal composite samples showes rather good properties: the compressive strength of 1800-2500MPa and compressive plasticity up to 13.5%.

AB - (Ti-Zr)-(Cu-Ni-Co) bulk metallic alloys containing 1000 mass ppm of boron were investigated in the present work. Taking compositional formula (Ti-Zr)49.5+x(Cu-Ni)49.5-xCo1 as a basis, we increased the content of Ti and Zr elements and decreased the content of Cu and Ni with the purpose of production of crystal-glassy composites. Such a kind of approach may allow combination of high strength of glassy alloys and good plasticity of crystalline alloys in these composite materials. According to this approach a large number of the alloys of different composition and different diameters were prepared and investigated. Some of the prepared bulk glassy-crystal composite samples showes rather good properties: the compressive strength of 1800-2500MPa and compressive plasticity up to 13.5%.

KW - Brittleness and ductility

KW - Casting

KW - Composites

KW - Glasses

KW - Mechanical properties at ambient temperature

KW - Metallic

UR - http://www.scopus.com/inward/record.url?scp=84866295899&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84866295899&partnerID=8YFLogxK

U2 - 10.1016/j.msea.2012.08.030

DO - 10.1016/j.msea.2012.08.030

M3 - Article

AN - SCOPUS:84866295899

SN - 0921-5093

VL - 558

SP - 472

EP - 477

JO - Materials Science & Engineering A: Structural Materials: Properties, Microstructure and Processing

JF - Materials Science & Engineering A: Structural Materials: Properties, Microstructure and Processing

ER -

Formation and investigation of the structure and mechanical properties of bulk metallic glassy composite (Ti-Zr)-(Cu-Ni-Co) alloys with the addition of Boron

Abstract

Keywords

Access to Document

Other files and links

Fingerprint

Cite this