Fundamental study of a real-time occupational dosimetry system for interventional radiology staff

Yohei Inaba, Koichi Chida, Ryota Kobayashi, Yuji Kaga, Masayuki Zuguchi

Research output: Contribution to journalArticlepeer-review

34 Citations (Scopus)


Real-time monitoring of the radiation doses received by interventional radiology (IR) staff has become highly desirable. However, occupational doses are rarely measured in real time, due to the lack of a feasible method for use in IR. Recently, the i2 system by RaySafe™ has been introduced to measure occupational exposure in IR in real time. The i2 system consists of several personal dosimeters (PDs) and a base station with a display and computer interfacing. We evaluated the fundamental performance (dose linearity, dose-rate dependence, angular dependence, batch uniformity and reproducibility) of the i2 system. The dose linearity of the i2 was excellent (R2 = 1.00) The i2 exhibited slight dose-rate dependence (̃20%) at very high dose rates (250 mGy h-1). Little angular dependence (within 20%) was observed between 0° and ±45°, in either the vertical or horizontal direction. We also found that the PD was highly sensitive (about 200%) at angles behind it, e.g. 180°. However, this backscattered radiation is not a problem, in general, due to the placement of the i2 sensor (PD) on the lead apron. We conclude that the i2 system facilitates accurate real-time monitoring and management of occupational doses during IR.

Original languageEnglish
Pages (from-to)N65-N71
JournalJournal of Radiological Protection
Issue number3
Publication statusPublished - 2014 Sept


  • Fluoroscopically guided procedures
  • Occupational radiation exposure
  • Radiation dosimetry
  • Radiation protection
  • Radiation safety


Dive into the research topics of 'Fundamental study of a real-time occupational dosimetry system for interventional radiology staff'. Together they form a unique fingerprint.

Cite this