Magnetic force microscopy observation of sensitized Inconel 600

Shigeru Takaya, Takayuki Suzuki, Tetsuya Uchimoto, Kenzo Miya

Research output: Contribution to journalArticlepeer-review

5 Citations (Scopus)


An application of magnetic force microscopes (MFM) is proposed to the characterization of sensitized Inconel 600 alloy with submicron order accuracy. The magnetic microstructures of Inconel 600 sensitized at 620°C for various heat treatment periods were observed by means of a MFM. MFM images show semicontinuous morphologies of the magnetizations near and at grain boundaries. The absolute value of the MFM signal, the phase shift between the oscillation of the cantilever and the piezoelectric actuator, at the grain boundary increases at first and then decreases with increasing heat treatment time, while the full width at half maximum about the MFM signals across the grain boundary increases continuously. These results coincide with the fact that the chromium content decreases at first due to production of the chromium carbide and then increase slightly due to the change in the activities of carbon and chromium near the grain boundaries. This method is useful because MFMs enable very high spatial resolution observations with minimal sample preparation and relatively easy operations.

Original languageEnglish
Pages (from-to)7011-7013
Number of pages3
JournalJournal of Applied Physics
Issue number10 I
Publication statusPublished - 2002 May 15


Dive into the research topics of 'Magnetic force microscopy observation of sensitized Inconel 600'. Together they form a unique fingerprint.

Cite this