Magnetic properties of Fe/(NiZnCu)Fe2O4 composite films prepared by aerosol deposition method

S. Sugimoto; K. Haga; M. Nakata; T. Kagotani; K. Inomata; J. Akedo

doi:10.1109/TMAG.2005.854880

Magnetic properties of Fe/(NiZnCu)Fe₂O₄ composite films prepared by aerosol deposition method

S. Sugimoto, K. Haga, M. Nakata, T. Kagotani, K. Inomata, J. Akedo

ENG - Materials Science

Research output: Contribution to journal › Article › peer-review

10 Citations (Scopus)

Abstract

xFe/(100-x)(NiZnCu)Fe₂O₄(x: wt%) composite films were prepared by the aerosol deposition (AD) method. The as-deposited x = 80 film exhibited the maximum relative permeability of μ″_{r max} = 18 at around 450 MHz. The AD film also showed μ″_r = 9 at 3 GHz, which were comparable to the values obtained with a heat-treated NiZnCu ferrite AD film. The result of transmission and reflection measurements revealed that these composite films have high potential for noise suppressors in the gigahertz range. In particular, the maximum of pure power loss (ΔP _loss/-P_in) of 0.68 have been obtained in the x = 4 film.

Original language	English
Pages (from-to)	3460-3462
Number of pages	3
Journal	IEEE Transactions on Magnetics
Volume	41
Issue number	10
DOIs	https://doi.org/10.1109/TMAG.2005.854880
Publication status	Published - 2005 Oct

Keywords

Aerosol deposition method
Composite film
Ferrite
Noise suppression
Permeability

Access to Document

10.1109/TMAG.2005.854880

Cite this

@article{a0dcd07490684f17917aa3a04120ffa0,

title = "Magnetic properties of Fe/(NiZnCu)Fe2O4 composite films prepared by aerosol deposition method",

abstract = "xFe/(100-x)(NiZnCu)Fe2O4(x: wt%) composite films were prepared by the aerosol deposition (AD) method. The as-deposited x = 80 film exhibited the maximum relative permeability of μ″r max = 18 at around 450 MHz. The AD film also showed μ″r = 9 at 3 GHz, which were comparable to the values obtained with a heat-treated NiZnCu ferrite AD film. The result of transmission and reflection measurements revealed that these composite films have high potential for noise suppressors in the gigahertz range. In particular, the maximum of pure power loss (ΔP loss/-Pin) of 0.68 have been obtained in the x = 4 film.",

keywords = "Aerosol deposition method, Composite film, Ferrite, Noise suppression, Permeability",

author = "S. Sugimoto and K. Haga and M. Nakata and T. Kagotani and K. Inomata and J. Akedo",

note = "Funding Information: This work was supported in part by the NEDO Project of Nano Structure Forming for Ceramics Integration Project in Nano Technology Program in Japan and Grant-in-Aid for Scientific Research (Scientific Research of Priority Areas “Panoscopic Assembling and High Ordered Functions for Rare Earth Materials (16 080 202),” 15360378, and 16 656 213) from the Ministry of Education, Science, Sports, and Culture of Japan.",

year = "2005",

month = oct,

doi = "10.1109/TMAG.2005.854880",

language = "English",

volume = "41",

pages = "3460--3462",

journal = "IEEE Transactions on Magnetics",

issn = "0018-9464",

publisher = "Institute of Electrical and Electronics Engineers Inc.",

number = "10",

}

TY - JOUR

T1 - Magnetic properties of Fe/(NiZnCu)Fe2O4 composite films prepared by aerosol deposition method

AU - Sugimoto, S.

AU - Haga, K.

AU - Nakata, M.

AU - Kagotani, T.

AU - Inomata, K.

AU - Akedo, J.

N1 - Funding Information: This work was supported in part by the NEDO Project of Nano Structure Forming for Ceramics Integration Project in Nano Technology Program in Japan and Grant-in-Aid for Scientific Research (Scientific Research of Priority Areas “Panoscopic Assembling and High Ordered Functions for Rare Earth Materials (16 080 202),” 15360378, and 16 656 213) from the Ministry of Education, Science, Sports, and Culture of Japan.

PY - 2005/10

Y1 - 2005/10

N2 - xFe/(100-x)(NiZnCu)Fe2O4(x: wt%) composite films were prepared by the aerosol deposition (AD) method. The as-deposited x = 80 film exhibited the maximum relative permeability of μ″r max = 18 at around 450 MHz. The AD film also showed μ″r = 9 at 3 GHz, which were comparable to the values obtained with a heat-treated NiZnCu ferrite AD film. The result of transmission and reflection measurements revealed that these composite films have high potential for noise suppressors in the gigahertz range. In particular, the maximum of pure power loss (ΔP loss/-Pin) of 0.68 have been obtained in the x = 4 film.

AB - xFe/(100-x)(NiZnCu)Fe2O4(x: wt%) composite films were prepared by the aerosol deposition (AD) method. The as-deposited x = 80 film exhibited the maximum relative permeability of μ″r max = 18 at around 450 MHz. The AD film also showed μ″r = 9 at 3 GHz, which were comparable to the values obtained with a heat-treated NiZnCu ferrite AD film. The result of transmission and reflection measurements revealed that these composite films have high potential for noise suppressors in the gigahertz range. In particular, the maximum of pure power loss (ΔP loss/-Pin) of 0.68 have been obtained in the x = 4 film.

KW - Aerosol deposition method

KW - Composite film

KW - Ferrite

KW - Noise suppression

KW - Permeability

UR - http://www.scopus.com/inward/record.url?scp=27744507999&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=27744507999&partnerID=8YFLogxK

U2 - 10.1109/TMAG.2005.854880

DO - 10.1109/TMAG.2005.854880

M3 - Article

AN - SCOPUS:27744507999

SN - 0018-9464

VL - 41

SP - 3460

EP - 3462

JO - IEEE Transactions on Magnetics

JF - IEEE Transactions on Magnetics

IS - 10

ER -

Magnetic properties of Fe/(NiZnCu)Fe₂O₄ composite films prepared by aerosol deposition method

Abstract

Keywords

Access to Document

Other files and links

Fingerprint

Cite this