Magnetic Properties of Sm-Fe-N Thick Film Magnets Prepared by the Aerosol Deposition Method

S. Sugimoto; T. Maeda; R. Kobayashi; J. Akedo; M. Lebedev; K. Inomata

doi:10.1109/TMAG.2003.816715

Magnetic Properties of Sm-Fe-N Thick Film Magnets Prepared by the Aerosol Deposition Method

S. Sugimoto, T. Maeda, R. Kobayashi, J. Akedo, M. Lebedev, K. Inomata

ENG - Materials Science

Research output: Contribution to journal › Article › peer-review

41 Citations (Scopus)

Abstract

This paper describes magnetic properties of Sm-Fe-N films prepared by an aerosol deposition method. The films with thickness of 3-45 μm were obtained by the deposition within 10 min and the deposition rate was estimated as approximately 2-10 μm/min. The Sm-Fe-N films showed relatively high micro Vickers hardness in the range from 500 to 700. The remanence of the Sm-Fe-N films was approximately 0.4 T, which was lower than that of initial host powders. However, almost of all samples showed higher coercivities around 1.8 T.

Original language	English
Pages (from-to)	2986-2988
Number of pages	3
Journal	IEEE Transactions on Magnetics
Volume	39
Issue number	5 II
DOIs	https://doi.org/10.1109/TMAG.2003.816715
Publication status	Published - 2003 Sept

Keywords

Aerosol deposition method (ADM)
Coercivity
High deposition rate
Sm-Fe-N film

Access to Document

10.1109/TMAG.2003.816715

Cite this

@article{f93ff1a18f984369a7d3281e8664bc3c,

title = "Magnetic Properties of Sm-Fe-N Thick Film Magnets Prepared by the Aerosol Deposition Method",

abstract = "This paper describes magnetic properties of Sm-Fe-N films prepared by an aerosol deposition method. The films with thickness of 3-45 μm were obtained by the deposition within 10 min and the deposition rate was estimated as approximately 2-10 μm/min. The Sm-Fe-N films showed relatively high micro Vickers hardness in the range from 500 to 700. The remanence of the Sm-Fe-N films was approximately 0.4 T, which was lower than that of initial host powders. However, almost of all samples showed higher coercivities around 1.8 T.",

keywords = "Aerosol deposition method (ADM), Coercivity, High deposition rate, Sm-Fe-N film",

author = "S. Sugimoto and T. Maeda and R. Kobayashi and J. Akedo and M. Lebedev and K. Inomata",

note = "Funding Information: Manuscript received December 26, 2002. This work was supported in part by NEDO Project of Nano Structure Forming for Ceramics Integration Project in Nano Technology Program in Japan.",

year = "2003",

month = sep,

doi = "10.1109/TMAG.2003.816715",

language = "English",

volume = "39",

pages = "2986--2988",

journal = "IEEE Transactions on Magnetics",

issn = "0018-9464",

publisher = "Institute of Electrical and Electronics Engineers Inc.",

number = "5 II",

}

TY - JOUR

T1 - Magnetic Properties of Sm-Fe-N Thick Film Magnets Prepared by the Aerosol Deposition Method

AU - Sugimoto, S.

AU - Maeda, T.

AU - Kobayashi, R.

AU - Akedo, J.

AU - Lebedev, M.

AU - Inomata, K.

N1 - Funding Information: Manuscript received December 26, 2002. This work was supported in part by NEDO Project of Nano Structure Forming for Ceramics Integration Project in Nano Technology Program in Japan.

PY - 2003/9

Y1 - 2003/9

N2 - This paper describes magnetic properties of Sm-Fe-N films prepared by an aerosol deposition method. The films with thickness of 3-45 μm were obtained by the deposition within 10 min and the deposition rate was estimated as approximately 2-10 μm/min. The Sm-Fe-N films showed relatively high micro Vickers hardness in the range from 500 to 700. The remanence of the Sm-Fe-N films was approximately 0.4 T, which was lower than that of initial host powders. However, almost of all samples showed higher coercivities around 1.8 T.

AB - This paper describes magnetic properties of Sm-Fe-N films prepared by an aerosol deposition method. The films with thickness of 3-45 μm were obtained by the deposition within 10 min and the deposition rate was estimated as approximately 2-10 μm/min. The Sm-Fe-N films showed relatively high micro Vickers hardness in the range from 500 to 700. The remanence of the Sm-Fe-N films was approximately 0.4 T, which was lower than that of initial host powders. However, almost of all samples showed higher coercivities around 1.8 T.

KW - Aerosol deposition method (ADM)

KW - Coercivity

KW - High deposition rate

KW - Sm-Fe-N film

UR - http://www.scopus.com/inward/record.url?scp=0141919457&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=0141919457&partnerID=8YFLogxK

U2 - 10.1109/TMAG.2003.816715

DO - 10.1109/TMAG.2003.816715

M3 - Article

AN - SCOPUS:0141919457

SN - 0018-9464

VL - 39

SP - 2986

EP - 2988

JO - IEEE Transactions on Magnetics

JF - IEEE Transactions on Magnetics

IS - 5 II

ER -

Magnetic Properties of Sm-Fe-N Thick Film Magnets Prepared by the Aerosol Deposition Method

Abstract

Keywords

Access to Document

Other files and links

Fingerprint

Cite this