Metallization of honeycomb-patterned films by all-wet deposition

Daisuke Ishii, Hiroshi Yabu, Yuji Hirai, Masatsugu Shimomura

Research output: Contribution to conferencePaperpeer-review

Abstract

We have reported that honeycomb-patterned films can be prepared by casting the solution of polystyrene and amphiphilic polymer 1 (Fig. 1) on a glass substrate by using condensed water droplet arrays as templates.[1] Moreover, polymeric films possessing pillar structures were fabricated by simple peeling of the top-layer of honeycomb-patterned films with Scotch tape. [2] Metallization of the honeycomb-patterned films was performed by electroless plating method including the Pt/Pd sputtering process as a catalyzation process.[3] In this presentation, we demonstrate that a brief metallization method of honeycomb-patterned films without sputtering process. All-wet deposition method enables us to give wide surface honeycomb-patterned metallized films easily. Surface morphology of the films was observed by scanning electron microscope (SEM).

Original languageEnglish
Pages4043
Number of pages1
Publication statusPublished - 2006
Event55th Society of Polymer Science Japan Symposium on Macromolecules - Toyama, Japan
Duration: 2006 Sept 202006 Sept 22

Conference

Conference55th Society of Polymer Science Japan Symposium on Macromolecules
Country/TerritoryJapan
CityToyama
Period06/9/2006/9/22

Keywords

  • Electroless plating
  • Honeycomb
  • Metallization
  • Self-assembly
  • Wet deposition

Fingerprint

Dive into the research topics of 'Metallization of honeycomb-patterned films by all-wet deposition'. Together they form a unique fingerprint.

Cite this