Multifunctional composites for energy harvesting based on piezoelectric microgenerator

Boyue Chen; Yu Jia; Xiaoli Tang; Fumio Narita; Kanjuro Makihara; Yu Shi

doi:10.1109/PowerMEMS54003.2021.9658402

Multifunctional composites for energy harvesting based on piezoelectric microgenerator

Boyue Chen, Yu Jia, Xiaoli Tang, Fumio Narita, Kanjuro Makihara, Yu Shi

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

Abstract

This paper developed a piezoelectric energy harvester based on a PVDF-TrFE microgenerator and carbon fibre reinforced polymers (CFRPs) with optimised layup design. The designed harvester targets on self-powering sensor nodes for aerospace and automotive application. As the main concern, the piezoelectric layer of the microgenerator was spin coated. The microgenerators were adhered to the composite panels to experimentally and numerically assessed the optimised layup for energy harvesting. It was observed that harvester with [45/-45]s layup produced the largest power output under sinusoidal excitation.

Original language	English
Title of host publication	2021 IEEE 20th International Conference on Micro and Nanotechnology for Power Generation and Energy Conversion Applications, PowerMEMS 2021
Publisher	Institute of Electrical and Electronics Engineers Inc.
Pages	164-167
Number of pages	4
ISBN (Electronic)	9781665422185
DOIs	https://doi.org/10.1109/PowerMEMS54003.2021.9658402
Publication status	Published - 2021
Event	20th IEEE International Conference on Micro and Nanotechnology for Power Generation and Energy Conversion Applications, PowerMEMS 2021 - Exeter, United Kingdom Duration: 2021 Dec 6 → 2021 Dec 8

Publication series

Name	2021 IEEE 20th International Conference on Micro and Nanotechnology for Power Generation and Energy Conversion Applications, PowerMEMS 2021

Conference

Conference	20th IEEE International Conference on Micro and Nanotechnology for Power Generation and Energy Conversion Applications, PowerMEMS 2021
Country/Territory	United Kingdom
City	Exeter
Period	21/12/6 → 21/12/8

Keywords

CFRPs
Multifunctional composites
microgenerator
vibrational energy harvesting

ASJC Scopus subject areas

Computer Networks and Communications
Energy Engineering and Power Technology
Renewable Energy, Sustainability and the Environment
Electrical and Electronic Engineering

UN SDGs

This output contributes to the following UN Sustainable Development Goals (SDGs)

Access to Document

10.1109/PowerMEMS54003.2021.9658402

Cite this

Chen, B., Jia, Y., Tang, X., Narita, F., Makihara, K., & Shi, Y. (2021). Multifunctional composites for energy harvesting based on piezoelectric microgenerator. In 2021 IEEE 20th International Conference on Micro and Nanotechnology for Power Generation and Energy Conversion Applications, PowerMEMS 2021 (pp. 164-167). (2021 IEEE 20th International Conference on Micro and Nanotechnology for Power Generation and Energy Conversion Applications, PowerMEMS 2021). Institute of Electrical and Electronics Engineers Inc.. https://doi.org/10.1109/PowerMEMS54003.2021.9658402

Multifunctional composites for energy harvesting based on piezoelectric microgenerator. / Chen, Boyue; Jia, Yu; Tang, Xiaoli et al.
2021 IEEE 20th International Conference on Micro and Nanotechnology for Power Generation and Energy Conversion Applications, PowerMEMS 2021. Institute of Electrical and Electronics Engineers Inc., 2021. p. 164-167 (2021 IEEE 20th International Conference on Micro and Nanotechnology for Power Generation and Energy Conversion Applications, PowerMEMS 2021).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

Chen, B, Jia, Y, Tang, X, Narita, F , Makihara, K & Shi, Y 2021, Multifunctional composites for energy harvesting based on piezoelectric microgenerator. in 2021 IEEE 20th International Conference on Micro and Nanotechnology for Power Generation and Energy Conversion Applications, PowerMEMS 2021. 2021 IEEE 20th International Conference on Micro and Nanotechnology for Power Generation and Energy Conversion Applications, PowerMEMS 2021, Institute of Electrical and Electronics Engineers Inc., pp. 164-167, 20th IEEE International Conference on Micro and Nanotechnology for Power Generation and Energy Conversion Applications, PowerMEMS 2021, Exeter, United Kingdom, 21/12/6. https://doi.org/10.1109/PowerMEMS54003.2021.9658402

Chen B, Jia Y, Tang X, Narita F , Makihara K, Shi Y. Multifunctional composites for energy harvesting based on piezoelectric microgenerator. In 2021 IEEE 20th International Conference on Micro and Nanotechnology for Power Generation and Energy Conversion Applications, PowerMEMS 2021. Institute of Electrical and Electronics Engineers Inc. 2021. p. 164-167. (2021 IEEE 20th International Conference on Micro and Nanotechnology for Power Generation and Energy Conversion Applications, PowerMEMS 2021). doi: 10.1109/PowerMEMS54003.2021.9658402

Chen, Boyue ; Jia, Yu ; Tang, Xiaoli et al. / Multifunctional composites for energy harvesting based on piezoelectric microgenerator. 2021 IEEE 20th International Conference on Micro and Nanotechnology for Power Generation and Energy Conversion Applications, PowerMEMS 2021. Institute of Electrical and Electronics Engineers Inc., 2021. pp. 164-167 (2021 IEEE 20th International Conference on Micro and Nanotechnology for Power Generation and Energy Conversion Applications, PowerMEMS 2021).

@inproceedings{6baf7178348746f5a438a59d953112e0,

title = "Multifunctional composites for energy harvesting based on piezoelectric microgenerator",

abstract = "This paper developed a piezoelectric energy harvester based on a PVDF-TrFE microgenerator and carbon fibre reinforced polymers (CFRPs) with optimised layup design. The designed harvester targets on self-powering sensor nodes for aerospace and automotive application. As the main concern, the piezoelectric layer of the microgenerator was spin coated. The microgenerators were adhered to the composite panels to experimentally and numerically assessed the optimised layup for energy harvesting. It was observed that harvester with [45/-45]s layup produced the largest power output under sinusoidal excitation. ",

keywords = "CFRPs, Multifunctional composites, microgenerator, vibrational energy harvesting",

author = "Boyue Chen and Yu Jia and Xiaoli Tang and Fumio Narita and Kanjuro Makihara and Yu Shi",

note = "Publisher Copyright: {\textcopyright} 2021 IEEE.; 20th IEEE International Conference on Micro and Nanotechnology for Power Generation and Energy Conversion Applications, PowerMEMS 2021 ; Conference date: 06-12-2021 Through 08-12-2021",

year = "2021",

doi = "10.1109/PowerMEMS54003.2021.9658402",

language = "English",

series = "2021 IEEE 20th International Conference on Micro and Nanotechnology for Power Generation and Energy Conversion Applications, PowerMEMS 2021",

publisher = "Institute of Electrical and Electronics Engineers Inc.",

pages = "164--167",

booktitle = "2021 IEEE 20th International Conference on Micro and Nanotechnology for Power Generation and Energy Conversion Applications, PowerMEMS 2021",

}

TY - GEN

T1 - Multifunctional composites for energy harvesting based on piezoelectric microgenerator

AU - Chen, Boyue

AU - Jia, Yu

AU - Tang, Xiaoli

AU - Narita, Fumio

AU - Makihara, Kanjuro

AU - Shi, Yu

PY - 2021

Y1 - 2021

N2 - This paper developed a piezoelectric energy harvester based on a PVDF-TrFE microgenerator and carbon fibre reinforced polymers (CFRPs) with optimised layup design. The designed harvester targets on self-powering sensor nodes for aerospace and automotive application. As the main concern, the piezoelectric layer of the microgenerator was spin coated. The microgenerators were adhered to the composite panels to experimentally and numerically assessed the optimised layup for energy harvesting. It was observed that harvester with [45/-45]s layup produced the largest power output under sinusoidal excitation.

AB - This paper developed a piezoelectric energy harvester based on a PVDF-TrFE microgenerator and carbon fibre reinforced polymers (CFRPs) with optimised layup design. The designed harvester targets on self-powering sensor nodes for aerospace and automotive application. As the main concern, the piezoelectric layer of the microgenerator was spin coated. The microgenerators were adhered to the composite panels to experimentally and numerically assessed the optimised layup for energy harvesting. It was observed that harvester with [45/-45]s layup produced the largest power output under sinusoidal excitation.

KW - CFRPs

KW - Multifunctional composites

KW - microgenerator

KW - vibrational energy harvesting

UR - http://www.scopus.com/inward/record.url?scp=85124649123&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=85124649123&partnerID=8YFLogxK

U2 - 10.1109/PowerMEMS54003.2021.9658402

DO - 10.1109/PowerMEMS54003.2021.9658402

M3 - Conference contribution

AN - SCOPUS:85124649123

T3 - 2021 IEEE 20th International Conference on Micro and Nanotechnology for Power Generation and Energy Conversion Applications, PowerMEMS 2021

SP - 164

EP - 167

BT - 2021 IEEE 20th International Conference on Micro and Nanotechnology for Power Generation and Energy Conversion Applications, PowerMEMS 2021

PB - Institute of Electrical and Electronics Engineers Inc.

T2 - 20th IEEE International Conference on Micro and Nanotechnology for Power Generation and Energy Conversion Applications, PowerMEMS 2021

Y2 - 6 December 2021 through 8 December 2021

ER -

Multifunctional composites for energy harvesting based on piezoelectric microgenerator

Abstract

Publication series

Conference

Keywords

ASJC Scopus subject areas

UN SDGs

Access to Document

Other files and links

Fingerprint

Cite this