Power/ground layers with EBG structure and ferrite film for noise suppression and power integrity improvement

Farhan Zaheed Mahmood; Yoshitaka Toyota; Kengo Iokibe; Koichi Kondo; Shigeyoshi Yoshida

doi:10.1109/EDAPS.2011.6213804

Power/ground layers with EBG structure and ferrite film for noise suppression and power integrity improvement

Farhan Zaheed Mahmood, Yoshitaka Toyota, Kengo Iokibe, Koichi Kondo, Shigeyoshi Yoshida

Material Solutions Center (MaSC)

Okayama University

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

6 Citations (Scopus)

Abstract

Noise suppression and power integrity (PI) are two requirements for power/ground layers of printed circuit boards (PCBs). We have proposed the application of electromagnetic bandgap (EBG) structure and ferrite film to power/ground layers. In this paper, not only a test board with the proposed structure but three other test boards to be compared were fabricated to measure with a vector network analyzer. The measured data was evaluated for noise-suppression and PI characteristics. Additional evaluation using a commercial circuit simulator was carried out to evaluate noise-suppression and PI characteristics, assuming a real power-supply circuit. Through the evaluation, the test boards with ferrite film including the proposed structure provided sufficient results.

Original language	English
Title of host publication	2011 IEEE Electrical Design of Advanced Packaging and Systems Symposium, EDAPS 2011
DOIs	https://doi.org/10.1109/EDAPS.2011.6213804
Publication status	Published - 2011
Event	2011 IEEE Electrical Design of Advanced Packaging and Systems Symposium, EDAPS 2011 - Hanzhou, China Duration: 2011 Dec 12 → 2011 Dec 14

Publication series

Name	2011 IEEE Electrical Design of Advanced Packaging and Systems Symposium, EDAPS 2011

Conference

Conference	2011 IEEE Electrical Design of Advanced Packaging and Systems Symposium, EDAPS 2011
Country/Territory	China
City	Hanzhou
Period	11/12/12 → 11/12/14

Access to Document

10.1109/EDAPS.2011.6213804

Cite this

Mahmood, F. Z., Toyota, Y., Iokibe, K., Kondo, K., & Yoshida, S. (2011). Power/ground layers with EBG structure and ferrite film for noise suppression and power integrity improvement. In 2011 IEEE Electrical Design of Advanced Packaging and Systems Symposium, EDAPS 2011 Article 6213804 (2011 IEEE Electrical Design of Advanced Packaging and Systems Symposium, EDAPS 2011). https://doi.org/10.1109/EDAPS.2011.6213804

@inproceedings{9a490ce4d0c0435f81aa0e7caa1d77d4,

title = "Power/ground layers with EBG structure and ferrite film for noise suppression and power integrity improvement",

abstract = "Noise suppression and power integrity (PI) are two requirements for power/ground layers of printed circuit boards (PCBs). We have proposed the application of electromagnetic bandgap (EBG) structure and ferrite film to power/ground layers. In this paper, not only a test board with the proposed structure but three other test boards to be compared were fabricated to measure with a vector network analyzer. The measured data was evaluated for noise-suppression and PI characteristics. Additional evaluation using a commercial circuit simulator was carried out to evaluate noise-suppression and PI characteristics, assuming a real power-supply circuit. Through the evaluation, the test boards with ferrite film including the proposed structure provided sufficient results.",

author = "Mahmood, {Farhan Zaheed} and Yoshitaka Toyota and Kengo Iokibe and Koichi Kondo and Shigeyoshi Yoshida",

year = "2011",

doi = "10.1109/EDAPS.2011.6213804",

language = "English",

isbn = "9781467322881",

series = "2011 IEEE Electrical Design of Advanced Packaging and Systems Symposium, EDAPS 2011",

booktitle = "2011 IEEE Electrical Design of Advanced Packaging and Systems Symposium, EDAPS 2011",

note = "2011 IEEE Electrical Design of Advanced Packaging and Systems Symposium, EDAPS 2011 ; Conference date: 12-12-2011 Through 14-12-2011",

}

Mahmood, FZ, Toyota, Y, Iokibe, K, Kondo, K & Yoshida, S 2011, Power/ground layers with EBG structure and ferrite film for noise suppression and power integrity improvement. in 2011 IEEE Electrical Design of Advanced Packaging and Systems Symposium, EDAPS 2011., 6213804, 2011 IEEE Electrical Design of Advanced Packaging and Systems Symposium, EDAPS 2011, 2011 IEEE Electrical Design of Advanced Packaging and Systems Symposium, EDAPS 2011, Hanzhou, China, 11/12/12. https://doi.org/10.1109/EDAPS.2011.6213804

Power/ground layers with EBG structure and ferrite film for noise suppression and power integrity improvement. / Mahmood, Farhan Zaheed; Toyota, Yoshitaka; Iokibe, Kengo et al.
2011 IEEE Electrical Design of Advanced Packaging and Systems Symposium, EDAPS 2011. 2011. 6213804 (2011 IEEE Electrical Design of Advanced Packaging and Systems Symposium, EDAPS 2011).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

TY - GEN

T1 - Power/ground layers with EBG structure and ferrite film for noise suppression and power integrity improvement

AU - Mahmood, Farhan Zaheed

AU - Toyota, Yoshitaka

AU - Iokibe, Kengo

AU - Kondo, Koichi

AU - Yoshida, Shigeyoshi

PY - 2011

Y1 - 2011

N2 - Noise suppression and power integrity (PI) are two requirements for power/ground layers of printed circuit boards (PCBs). We have proposed the application of electromagnetic bandgap (EBG) structure and ferrite film to power/ground layers. In this paper, not only a test board with the proposed structure but three other test boards to be compared were fabricated to measure with a vector network analyzer. The measured data was evaluated for noise-suppression and PI characteristics. Additional evaluation using a commercial circuit simulator was carried out to evaluate noise-suppression and PI characteristics, assuming a real power-supply circuit. Through the evaluation, the test boards with ferrite film including the proposed structure provided sufficient results.

AB - Noise suppression and power integrity (PI) are two requirements for power/ground layers of printed circuit boards (PCBs). We have proposed the application of electromagnetic bandgap (EBG) structure and ferrite film to power/ground layers. In this paper, not only a test board with the proposed structure but three other test boards to be compared were fabricated to measure with a vector network analyzer. The measured data was evaluated for noise-suppression and PI characteristics. Additional evaluation using a commercial circuit simulator was carried out to evaluate noise-suppression and PI characteristics, assuming a real power-supply circuit. Through the evaluation, the test boards with ferrite film including the proposed structure provided sufficient results.

UR - http://www.scopus.com/inward/record.url?scp=84864258469&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84864258469&partnerID=8YFLogxK

U2 - 10.1109/EDAPS.2011.6213804

DO - 10.1109/EDAPS.2011.6213804

M3 - Conference contribution

AN - SCOPUS:84864258469

SN - 9781467322881

T3 - 2011 IEEE Electrical Design of Advanced Packaging and Systems Symposium, EDAPS 2011

BT - 2011 IEEE Electrical Design of Advanced Packaging and Systems Symposium, EDAPS 2011

T2 - 2011 IEEE Electrical Design of Advanced Packaging and Systems Symposium, EDAPS 2011

Y2 - 12 December 2011 through 14 December 2011

ER -

Mahmood FZ, Toyota Y, Iokibe K, Kondo K, Yoshida S. Power/ground layers with EBG structure and ferrite film for noise suppression and power integrity improvement. In 2011 IEEE Electrical Design of Advanced Packaging and Systems Symposium, EDAPS 2011. 2011. 6213804. (2011 IEEE Electrical Design of Advanced Packaging and Systems Symposium, EDAPS 2011). doi: 10.1109/EDAPS.2011.6213804

Power/ground layers with EBG structure and ferrite film for noise suppression and power integrity improvement

Abstract

Publication series

Conference

Access to Document

Other files and links

Fingerprint

Cite this