Preparation of Fe/Ni-Zn-Cu ferrite stacked films by aerosol deposition method

S. Sugimoto, V. Chan, M. Noguchi, N. Tezuka, K. Inomata, J. Akedo

Research output: Contribution to journalArticlepeer-review

5 Citations (Scopus)


Composite or stacked films composed of Fe and Ni-Zn-Cu ferrite were prepared by aerosol deposition (AD) method, and the relationship between magnetic properties and microstructure was investigated. Aiming to control the microstructure, two aerosol chambers and double nozzles, from which each powder ejected independently, were used in the AD system. With increase in the vibration frequency of Fe aerosol chamber (VFe) or the deposition time of Fe powder (tFe), the Fe content in the films increased, which was resulted in the increase of saturation magnetization and permeability. The composite or stacked films also showed relatively high-noise suppression effect (ΔPloss/Pin=∼0.58). Microstructural analyses revealed that the stacked film consisted of Fe and ferrite layers with thickness of 1 and 15 μm, respectively.

Original languageEnglish
Pages (from-to)2549-2551
Number of pages3
JournalJournal of Magnetism and Magnetic Materials
Issue number2 SUPPL. PART 3
Publication statusPublished - 2007 Mar


  • Aerosol deposition method
  • Composite film
  • Ferrite
  • Noise suppression
  • Permeability


Dive into the research topics of 'Preparation of Fe/Ni-Zn-Cu ferrite stacked films by aerosol deposition method'. Together they form a unique fingerprint.

Cite this