TY - JOUR
T1 - Recrystallization behavior of a two-way cold rolled 12Cr ODS steel
AU - Shen, Jingjie
AU - Yang, Huilong
AU - Li, Yanfen
AU - Kano, Sho
AU - Matsukawa, Yoshitaka
AU - Satoh, Yuhki
AU - Abe, Hiroaki
N1 - Funding Information:
This study was supported in part by a project “R&D of nuclear fuel cladding materials and their environmental degradations for the development of safety standards” entrusted to Tohoku University by the Ministry of Education, Culture, Sports, Science and Technology in Japan (MEXT) . The authors would like to thank the anonymous reviewers for the insightful comments and suggestions.
Publisher Copyright:
© 2019 Elsevier B.V.
PY - 2019/6
Y1 - 2019/6
N2 - Recrystallization behavior of a two-way cold rolled 12Cr ODS steel during annealing in the range of 1273–1473 K was systemically investigated by means of scanning electron microscopy, electron backscatter diffraction, transmission electron microscopy, and hardness testing. Results show that original grains with <110> axis were rotated to <111> axis parallel to normal direction after ∼60% reduction in thickness. Recovery stage was obvious at 1273 K annealing taking about 100 min, but at higher temperatures it was shortly followed by recrystallization. ∼84% recrystallization was observed after annealing at 1473 K for 60 min, indicating that the new cold rolling process decreases the recrystallization temperature in comparison with the as-fabricated specimen completing recrystallization at 1673 K. In addition, the microtexture evolution was characterized as recrystallization proceeded. The intensity of {111}<110> and {111}<112> components decreased, while intensive {110}<001> component was obtained. Dependence of the stored energy on the orientation of deformed grains is presumed for the reduction of {111}<110> and {111}<112> components, and oriented growth is probably responsible for the enhancement of {110}<001> texture after recrystallization.
AB - Recrystallization behavior of a two-way cold rolled 12Cr ODS steel during annealing in the range of 1273–1473 K was systemically investigated by means of scanning electron microscopy, electron backscatter diffraction, transmission electron microscopy, and hardness testing. Results show that original grains with <110> axis were rotated to <111> axis parallel to normal direction after ∼60% reduction in thickness. Recovery stage was obvious at 1273 K annealing taking about 100 min, but at higher temperatures it was shortly followed by recrystallization. ∼84% recrystallization was observed after annealing at 1473 K for 60 min, indicating that the new cold rolling process decreases the recrystallization temperature in comparison with the as-fabricated specimen completing recrystallization at 1673 K. In addition, the microtexture evolution was characterized as recrystallization proceeded. The intensity of {111}<110> and {111}<112> components decreased, while intensive {110}<001> component was obtained. Dependence of the stored energy on the orientation of deformed grains is presumed for the reduction of {111}<110> and {111}<112> components, and oriented growth is probably responsible for the enhancement of {110}<001> texture after recrystallization.
KW - Microstructure
KW - Microtexture
KW - Oxide dispersion strengthened steels
KW - Recrystallization
KW - Two-way cold rolling
UR - http://www.scopus.com/inward/record.url?scp=85063382150&partnerID=8YFLogxK
UR - http://www.scopus.com/inward/citedby.url?scp=85063382150&partnerID=8YFLogxK
U2 - 10.1016/j.fusengdes.2019.03.113
DO - 10.1016/j.fusengdes.2019.03.113
M3 - Article
AN - SCOPUS:85063382150
SN - 0920-3796
VL - 143
SP - 99
EP - 105
JO - Fusion Engineering and Design
JF - Fusion Engineering and Design
ER -