SOME PRACTICAL TECHNOLOGY FOR IMPLEMENTATION OF SOLIDIFICATION SIMULATION AS APPLIED TO SAND MOLD CASTINGS.

Kouichi Anzai; Eisuke Niyama; Toshio Uchida; Akiko Hosogane. Akiko

doi:10.2355/tetsutohagane1955.71.10_1319

SOME PRACTICAL TECHNOLOGY FOR IMPLEMENTATION OF SOLIDIFICATION SIMULATION AS APPLIED TO SAND MOLD CASTINGS.

Kouichi Anzai, Eisuke Niyama, Toshio Uchida, Akiko Hosogane. Akiko

Research output: Contribution to journal › Article › peer-review

Abstract

Although it has become clear that a computer simulation is an efficient method to predict a generation of defects in castings, there has not been sufficiently economical hardware and software which can be applied to 3-dimensional model in a practical sense. The computer system can deal with 2- and 3-dimensional models. It takes about half an hour to one hour to input the data for a 3-dimensional model by special data processing. The personal computer applicable to 2-dimensional models has a pre-processor enabling easy data input and a post-processor with which one can evaluate the results by color graphics.

Original language	English
Pages (from-to)	1319-1326
Number of pages	8
Journal	Tetsu-To-Hagane/Journal of the Iron and Steel Institute of Japan
Volume	71
Issue number	10
DOIs	https://doi.org/10.2355/tetsutohagane1955.71.10_1319
Publication status	Published - 1985
Externally published	Yes

ASJC Scopus subject areas

Condensed Matter Physics
Physical and Theoretical Chemistry
Metals and Alloys
Materials Chemistry

Access to Document

10.2355/tetsutohagane1955.71.10_1319

Cite this

@article{08f60c8d16104aa9991b005aed5ef304,

title = "SOME PRACTICAL TECHNOLOGY FOR IMPLEMENTATION OF SOLIDIFICATION SIMULATION AS APPLIED TO SAND MOLD CASTINGS.",

abstract = "Although it has become clear that a computer simulation is an efficient method to predict a generation of defects in castings, there has not been sufficiently economical hardware and software which can be applied to 3-dimensional model in a practical sense. The computer system can deal with 2- and 3-dimensional models. It takes about half an hour to one hour to input the data for a 3-dimensional model by special data processing. The personal computer applicable to 2-dimensional models has a pre-processor enabling easy data input and a post-processor with which one can evaluate the results by color graphics.",

author = "Kouichi Anzai and Eisuke Niyama and Toshio Uchida and {Hosogane. Akiko}, Akiko",

year = "1985",

doi = "10.2355/tetsutohagane1955.71.10_1319",

language = "English",

volume = "71",

pages = "1319--1326",

journal = "Tetsu-To-Hagane/Journal of the Iron and Steel Institute of Japan",

issn = "0021-1575",

publisher = "Iron and Steel Institute of Japan",

number = "10",

}

TY - JOUR

T1 - SOME PRACTICAL TECHNOLOGY FOR IMPLEMENTATION OF SOLIDIFICATION SIMULATION AS APPLIED TO SAND MOLD CASTINGS.

AU - Anzai, Kouichi

AU - Niyama, Eisuke

AU - Uchida, Toshio

AU - Hosogane. Akiko, Akiko

PY - 1985

Y1 - 1985

N2 - Although it has become clear that a computer simulation is an efficient method to predict a generation of defects in castings, there has not been sufficiently economical hardware and software which can be applied to 3-dimensional model in a practical sense. The computer system can deal with 2- and 3-dimensional models. It takes about half an hour to one hour to input the data for a 3-dimensional model by special data processing. The personal computer applicable to 2-dimensional models has a pre-processor enabling easy data input and a post-processor with which one can evaluate the results by color graphics.

AB - Although it has become clear that a computer simulation is an efficient method to predict a generation of defects in castings, there has not been sufficiently economical hardware and software which can be applied to 3-dimensional model in a practical sense. The computer system can deal with 2- and 3-dimensional models. It takes about half an hour to one hour to input the data for a 3-dimensional model by special data processing. The personal computer applicable to 2-dimensional models has a pre-processor enabling easy data input and a post-processor with which one can evaluate the results by color graphics.

UR - http://www.scopus.com/inward/record.url?scp=0022111966&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=0022111966&partnerID=8YFLogxK

U2 - 10.2355/tetsutohagane1955.71.10_1319

DO - 10.2355/tetsutohagane1955.71.10_1319

M3 - Article

AN - SCOPUS:0022111966

SN - 0021-1575

VL - 71

SP - 1319

EP - 1326

JO - Tetsu-To-Hagane/Journal of the Iron and Steel Institute of Japan

JF - Tetsu-To-Hagane/Journal of the Iron and Steel Institute of Japan

IS - 10

ER -

SOME PRACTICAL TECHNOLOGY FOR IMPLEMENTATION OF SOLIDIFICATION SIMULATION AS APPLIED TO SAND MOLD CASTINGS.

Abstract

ASJC Scopus subject areas

Access to Document

Other files and links

Fingerprint

Cite this