The Application of 3D Printing Technology to Fabricate an Imitative Crack for Electromagnetic NDT&E Studies

Noritaka Yusa; Weixi Chen; Hidetoshi Hashizume

doi:10.3233/978-1-61499-767-2-150

The Application of 3D Printing Technology to Fabricate an Imitative Crack for Electromagnetic NDT&E Studies

Noritaka Yusa, Weixi Chen, Hidetoshi Hashizume

ENG - Quantum Science and Energy Engineering

Research output: Chapter in Book/Report/Conference proceeding › Chapter

Abstract

This study evaluates the applicability of 3D printing technology for creating artificial flaws that imitate real cracks for the development of electromagnetic nondestructive testing methods. A plate containing an artificial flaw with branching and electrical contact is fabricated using a powderbed-based laser metal additive manufacturing machine. Eddy current testing using an absolute pancake probe is conducted to gather the signals due to the flaw. Subsequent finite element simulations on the basis of the results of destructive testing suggests that one should design a flaw whose signals do not change so significantly even though the profile of the flaw changes almost 0.1 mm.

Original language	English
Title of host publication	Electromagnetic Nondestructive Evaluation (XX)
Editors	Artur Lopes Ribeiro, Artur Lopes Ribeiro, Helena Geirinhas Ramos, Helena Geirinhas Ramos
Publisher	IOS Press
Pages	150-156
Number of pages	7
ISBN (Electronic)	9781614997665
DOIs	https://doi.org/10.3233/978-1-61499-767-2-150
Publication status	Published - 2017

Publication series

Name	Studies in Applied Electromagnetics and Mechanics
Volume	42
ISSN (Print)	1383-7281
ISSN (Electronic)	1879-8322

Keywords

additive manufacturing
artificial defect
austenitic stainless steel
eddy current testing
performance demonstration
stress corrosion cracking

ASJC Scopus subject areas

Mechanical Engineering
Electrical and Electronic Engineering

Access to Document

10.3233/978-1-61499-767-2-150

Cite this

Yusa, N., Chen, W., & Hashizume, H. (2017). The Application of 3D Printing Technology to Fabricate an Imitative Crack for Electromagnetic NDT&E Studies. In A. L. Ribeiro, A. L. Ribeiro, H. G. Ramos, & H. G. Ramos (Eds.), Electromagnetic Nondestructive Evaluation (XX) (pp. 150-156). (Studies in Applied Electromagnetics and Mechanics; Vol. 42). IOS Press. https://doi.org/10.3233/978-1-61499-767-2-150

The Application of 3D Printing Technology to Fabricate an Imitative Crack for Electromagnetic NDT&E Studies. / Yusa, Noritaka; Chen, Weixi; Hashizume, Hidetoshi.
Electromagnetic Nondestructive Evaluation (XX). ed. / Artur Lopes Ribeiro; Artur Lopes Ribeiro; Helena Geirinhas Ramos; Helena Geirinhas Ramos. IOS Press, 2017. p. 150-156 (Studies in Applied Electromagnetics and Mechanics; Vol. 42).

Research output: Chapter in Book/Report/Conference proceeding › Chapter

Yusa, N, Chen, W & Hashizume, H 2017, The Application of 3D Printing Technology to Fabricate an Imitative Crack for Electromagnetic NDT&E Studies. in AL Ribeiro, AL Ribeiro, HG Ramos & HG Ramos (eds), Electromagnetic Nondestructive Evaluation (XX). Studies in Applied Electromagnetics and Mechanics, vol. 42, IOS Press, pp. 150-156. https://doi.org/10.3233/978-1-61499-767-2-150

Yusa, Noritaka ; Chen, Weixi ; Hashizume, Hidetoshi. / The Application of 3D Printing Technology to Fabricate an Imitative Crack for Electromagnetic NDT&E Studies. Electromagnetic Nondestructive Evaluation (XX). editor / Artur Lopes Ribeiro ; Artur Lopes Ribeiro ; Helena Geirinhas Ramos ; Helena Geirinhas Ramos. IOS Press, 2017. pp. 150-156 (Studies in Applied Electromagnetics and Mechanics).

@inbook{b4ac996b03ca4fd7a615b50e6c83e917,

title = "The Application of 3D Printing Technology to Fabricate an Imitative Crack for Electromagnetic NDT&E Studies",

abstract = "This study evaluates the applicability of 3D printing technology for creating artificial flaws that imitate real cracks for the development of electromagnetic nondestructive testing methods. A plate containing an artificial flaw with branching and electrical contact is fabricated using a powderbed-based laser metal additive manufacturing machine. Eddy current testing using an absolute pancake probe is conducted to gather the signals due to the flaw. Subsequent finite element simulations on the basis of the results of destructive testing suggests that one should design a flaw whose signals do not change so significantly even though the profile of the flaw changes almost 0.1 mm.",

keywords = "additive manufacturing, artificial defect, austenitic stainless steel, eddy current testing, performance demonstration, stress corrosion cracking",

author = "Noritaka Yusa and Weixi Chen and Hidetoshi Hashizume",

year = "2017",

doi = "10.3233/978-1-61499-767-2-150",

language = "English",

series = "Studies in Applied Electromagnetics and Mechanics",

publisher = "IOS Press",

pages = "150--156",

editor = "Ribeiro, {Artur Lopes} and Ribeiro, {Artur Lopes} and Ramos, {Helena Geirinhas} and Ramos, {Helena Geirinhas}",

booktitle = "Electromagnetic Nondestructive Evaluation (XX)",

}

TY - CHAP

T1 - The Application of 3D Printing Technology to Fabricate an Imitative Crack for Electromagnetic NDT&E Studies

AU - Yusa, Noritaka

AU - Chen, Weixi

AU - Hashizume, Hidetoshi

PY - 2017

Y1 - 2017

N2 - This study evaluates the applicability of 3D printing technology for creating artificial flaws that imitate real cracks for the development of electromagnetic nondestructive testing methods. A plate containing an artificial flaw with branching and electrical contact is fabricated using a powderbed-based laser metal additive manufacturing machine. Eddy current testing using an absolute pancake probe is conducted to gather the signals due to the flaw. Subsequent finite element simulations on the basis of the results of destructive testing suggests that one should design a flaw whose signals do not change so significantly even though the profile of the flaw changes almost 0.1 mm.

AB - This study evaluates the applicability of 3D printing technology for creating artificial flaws that imitate real cracks for the development of electromagnetic nondestructive testing methods. A plate containing an artificial flaw with branching and electrical contact is fabricated using a powderbed-based laser metal additive manufacturing machine. Eddy current testing using an absolute pancake probe is conducted to gather the signals due to the flaw. Subsequent finite element simulations on the basis of the results of destructive testing suggests that one should design a flaw whose signals do not change so significantly even though the profile of the flaw changes almost 0.1 mm.

KW - additive manufacturing

KW - artificial defect

KW - austenitic stainless steel

KW - eddy current testing

KW - performance demonstration

KW - stress corrosion cracking

UR - http://www.scopus.com/inward/record.url?scp=85020048000&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=85020048000&partnerID=8YFLogxK

U2 - 10.3233/978-1-61499-767-2-150

DO - 10.3233/978-1-61499-767-2-150

M3 - Chapter

AN - SCOPUS:85020048000

T3 - Studies in Applied Electromagnetics and Mechanics

SP - 150

EP - 156

BT - Electromagnetic Nondestructive Evaluation (XX)

A2 - Ribeiro, Artur Lopes

A2 - Ramos, Helena Geirinhas

PB - IOS Press

ER -

The Application of 3D Printing Technology to Fabricate an Imitative Crack for Electromagnetic NDT&E Studies

Abstract

Publication series

Keywords

ASJC Scopus subject areas

Access to Document

Other files and links

Fingerprint

Cite this