Effect of rare earth metal on plasma properties in GMAW using CO2 shielding gas

Titinan Methong, Tasuku Yamaguchi, Masaya Shigeta, Manabu Tanaka, Rinsei Ikeda, Muneo Matsushita, Bovornchok Poopat

研究成果: ジャーナルへの寄稿学術論文査読

16 被引用数 (Scopus)

抄録

Gas metal arc welding (GMAW) process, the effect of welding polarity and rare earth metal (REM) elements on physical properties was investigated through the observation of the plasma characteristics using the optical emission spectroscopy method which is suitable respectively to the O plasma region and the Fe plasma region. At the present experimental conditions, the MG-50 wire electrode and KC-500 wire electrode (REM-added electrode) were used for welding with 100% CO2 shielding gas. The results of the KC-500 wire electrode with DCEN polarity showed that the maximum temperature of the O plasma region was around 13,000–13,500 K. The maximum occurs at the region apart from the arc axis. The effect REM elements can cause high current density and electromagnetic pinch force at the tip of electrode. Meanwhile, the metal droplet diameter became smaller like spray transfer during arc with DCEN polarity.

本文言語英語
ページ(範囲)1039-1047
ページ数9
ジャーナルWelding in the World, Le Soudage Dans Le Monde
61
5
DOI
出版ステータス出版済み - 2017 9月 1

フィンガープリント

「Effect of rare earth metal on plasma properties in GMAW using CO2 shielding gas」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル