Evaluation of friction coefficient by simulation in bulk metal forming process

Y. P. Li, E. Onodera, A. Chiba

研究成果: ジャーナルへの寄稿学術論文査読

29 被引用数 (Scopus)

抄録

With the objective of evaluating the accuracy of the upper-bound theory for calculating the average Tresca friction coefficient m in the hot forging process, we performed simulations using different values of m in each compression process to high strain levels. It was found that the upper-bound theory is not applicable at high strain levels, because the contact surface of the cylindrical sample is composed of an originally flat end surface and the annular portion formed by the contact of the lateral surface with the anvil surface. The relation among P = RmH/RtH0, true strain, and m could be expressed by (a′ + a″ ε + a‴ ε2 - P) (b′ + b″ ε + b‴ ε2)m + (c″ ε + c‴ ε2)m 2 = 0. Here, the m values obtained were in good agreement with the actual ones used in the simulations. The value of m of the arbitrary geometry cylindrical sample could also be directly read from a contour map with a relationship among nominal strain, parameter B of the corresponding standard sample, and m.

本文言語英語
ページ(範囲)224-232
ページ数9
ジャーナルMetallurgical and Materials Transactions A: Physical Metallurgy and Materials Science
41
1
DOI
出版ステータス出版済み - 2010 1月

フィンガープリント

「Evaluation of friction coefficient by simulation in bulk metal forming process」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル