Flame stabilization and emission characteristics ofammonia flames in a micro gas turbine combustor

Ekenechukwu C. Okafor, Kazuma Sakai, Akihiro Hayakawa, Taku Kudo, Osamu Kurata, Norihiko Iki, Hideaki Kobayashi

研究成果: Paper査読

抄録

In order to efficiently utilize ammonia as a gas turbine fuel, it is relevant to understand the combustion characteristics of ammonia in a gas turbine combustor. In this study stabilization and emission characteristics of non-premixed ammonia flames were investigated experimentally using a micro gas turbine swirl burner. The effects of ammonia injection angle, global equivalence ratio of the non-premixed flame, and ambient pressure on flame stabilization and emissions of unburned NH3 and NO were investigated at gas inlet temperature of 298 K. One dimensional numerical calculations using ANSYS Chemkin PRO were performed to extend understanding of the experimental results. Ammonia flames were stabilized over a range of equivalence ratios. An increase in the ammonia injection angle to the burner axis resulted in increased flame stability and more efficient combustion. Ammonia emission increased with an increase in global equivalence ratio. On the other hand, NO emission decreased with global equivalence ratio owing to the increased reduction of NO by amine radicals. With an increase in pressure, NO emissions decreased due to a decrease in H and OH radicals concentration.

本文言語English
出版ステータスPublished - 2017
イベント11th Asia-Pacific Conference on Combustion, ASPACC 2017 - Sydney, Australia
継続期間: 2017 12月 102017 12月 14

Other

Other11th Asia-Pacific Conference on Combustion, ASPACC 2017
国/地域Australia
CitySydney
Period17/12/1017/12/14

ASJC Scopus subject areas

  • 凝縮系物理学
  • エネルギー工学および電力技術
  • 燃料技術
  • 化学工学(全般)

フィンガープリント

「Flame stabilization and emission characteristics ofammonia flames in a micro gas turbine combustor」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル