High-speed chemical imaging system based on front-side-illuminated LAPS

Akinori Itabashi, Naoki Kosaka, Ko Ichiro Miyamoto, Torsten Wagner, Michael J. Schöning, Tatsuo Yoshinobu

研究成果: Article査読

16 被引用数 (Scopus)


The chemical imaging sensor is a semiconductor-based chemical sensor that can visualize the spatial distribution of specific ions on the sensing surface. The conventional chemical imaging system based on the light-addressable potentiometric sensor (LAPS), however, required a long time to obtain a chemical image, due to the slow mechanical scan of a single light beam. For high-speed imaging, a plurality of light beams modulated at different frequencies can be employed to measure the ion concentrations simultaneously at different locations on the sensor plate by frequency division multiplex (FDM). However, the conventional measurement geometry of back-side illumination limited the bandwidth of the modulation frequency required for FDM measurement, because of the low-pass filtering characteristics of carrier diffusion in the Si substrate. In this study, a high-speed chemical imaging system based on front-side-illuminated LAPS was developed, which achieved high-speed spatiotemporal recording of pH change at a rate of 70 frames per second.

ジャーナルSensors and Actuators, B: Chemical
出版ステータスPublished - 2013

ASJC Scopus subject areas

  • 電子材料、光学材料、および磁性材料
  • 器械工学
  • 凝縮系物理学
  • 表面、皮膜および薄膜
  • 金属および合金
  • 電子工学および電気工学
  • 材料化学


「High-speed chemical imaging system based on front-side-illuminated LAPS」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。