Implementation of a low-power FPGA based on synchronous/asynchronous hybrid architecture

Shota Ishihara, Ryoto Tsuchiya, Yoshiya Komatsu, Masanori Hariyama, Michitaka Kameyama

研究成果: ジャーナルへの寄稿学術論文査読

抄録

This paper presents a low-power FPGA based on mixed synchronous/ asynchronous design. The proposed FPGA consists of several sections which consist of logic blocks, and each section can be used as either a synchronous circuit or an asynchronous circuit according to its workload. An asynchronous circuit is power-efficient for a low-workload section since it does not require the clock tree which always consumes the power. On the other hand, a synchronous circuit is power-efficient for a high-workload section because of its simple hardware. The major consideration is designing an area-efficient synchronous/asynchronous hybrid logic block. This is because the hardware amount of the asynchronous circuit is about double that of the synchronous circuit, and the typical implementation wastes half of the hardware in synchronous mode. To solve this problem, we propose a hybrid logic block that can be used as either a single asynchronous logic block or two synchronous logic blocks. The proposed FPGA is fabricated using a 65-nm CMOS process. When the workload of a section is below 22%, asynchronous mode is more power-efficient than synchronous mode. Otherwise synchronous mode is more power-efficient.

本文言語英語
ページ(範囲)1669-1679
ページ数11
ジャーナルIEICE Transactions on Electronics
E94-C
10
DOI
出版ステータス出版済み - 2011 10月

フィンガープリント

「Implementation of a low-power FPGA based on synchronous/asynchronous hybrid architecture」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル