Improvement of pitting corrosion resistance of type 316L stainless steel by potentiostatic removal of surface MnS inclusions

Nobuyoshi Hara, Koichi Hirabayashi, Yu Sugawara, Izumi Muto

研究成果: ジャーナルへの寄稿学術論文査読

34 被引用数 (Scopus)

抄録

The beneficial effect of the removal of MnS inclusions on the pitting of stainless steels has been demonstrated in two ways. (1) High-purity Type 316L stainless steel with no inclusions was used as a specimen in the measurement of anodic polarization curves in 0.5 M NaCl and (2) commercial Type 316L stainless steel with MnS and slag-related inclusions was first polarized at different potentials for 30 min in 1 M NaOof pH 3 and then anodic polarization measurements were taken in 0.5 M NaCl. Pitting did not occur in the passive or transpassive region of the high-purity steel. The polarization treatment dissolved MnS and some oxide inclusions (CaO and SiO on the surface of the commercial steel. An increase in pitting potential of the commercial steel was noted after treatment at potentials above 0.2 V. At the same time, the number of current spikes due to metastable pits decreased significantly. These results are more likely due to the beneficial effect of removing MnS inclusions from the steel surface rather than the modification effect of the chemical composition of passive films on the surface.

本文言語英語
論文番号482730
ジャーナルInternational Journal of Corrosion
2012
DOI
出版ステータス出版済み - 2012

フィンガープリント

「Improvement of pitting corrosion resistance of type 316L stainless steel by potentiostatic removal of surface MnS inclusions」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル