We investigated influence of iron-based workpiece materials on the characteristics of the Si layers by electrical discharge coating. It was found that the chemical elements of the precipitations were uniformly dispersed in the layer on the workpiece containing the precipitations whose sizes were a few micrometers. By contrast, voids occurred in the layer on the workpiece containing bigger precipitations because the precipitations not melted totally in the coating process were the starting points of the voids. In addition, the surface of the Si layer on FC250 was extremely rough and the distribution of the chemical elements of the layer was inhomogeneous. However, the layer was amorphous and the friction coefficient of the layer was lower than that of the workpiece.
|出版済み - 2015 10月 18
|8th International Conference on Leading Edge Manufacturing in 21st Century, LEM 2015 - Kyoto, 日本
継続期間: 2015 10月 18 → 2015 10月 22
|8th International Conference on Leading Edge Manufacturing in 21st Century, LEM 2015
|15/10/18 → 15/10/22