Kinetic-model-based design of industrial reactor for catalytic hydrogen production via ammonia decomposition

Atsushi Takahashi, Tadahiro Fujitani

研究成果: ジャーナルへの寄稿学術論文査読

3 被引用数 (Scopus)

抄録

A two-dimensional reactor model based on reaction kinetics and heat and mass transfer for catalytic NH3 decomposition was constructed. A reactor design that minimizes the effect of endothermic reaction was investigated. It is difficult to design a single-tube reactor for NH3 treatment at a flow rate of 10 m3/h because heat transfer from the reactor wall cannot keep up with the fast consumption of heat by the reaction, even under low space velocity conditions. The target conversion was achieved by decreasing the NH3 supply rate. A reactor with a packed bed of suitable length was designed. Industrial-scale NH3 treatment can be achieved using a multi-tube reactor.

本文言語英語
ページ(範囲)333-340
ページ数8
ジャーナルChemical Engineering Research and Design
165
DOI
出版ステータス出版済み - 2021 1月

フィンガープリント

「Kinetic-model-based design of industrial reactor for catalytic hydrogen production via ammonia decomposition」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル