We have reported that honeycomb-patterned films can be prepared by casting the solution of polystyrene and amphiphilic polymer 1 (Fig. 1) on a glass substrate by using condensed water droplet arrays as templates. Moreover, polymeric films possessing pillar structures were fabricated by simple peeling of the top-layer of honeycomb-patterned films with Scotch tape.  Metallization of the honeycomb-patterned films was performed by electroless plating method including the Pt/Pd sputtering process as a catalyzation process. In this presentation, we demonstrate that a brief metallization method of honeycomb-patterned films without sputtering process. All-wet deposition method enables us to give wide surface honeycomb-patterned metallized films easily. Surface morphology of the films was observed by scanning electron microscope (SEM).
|出版ステータス||Published - 2006|
|イベント||55th Society of Polymer Science Japan Symposium on Macromolecules - Toyama, Japan|
継続期間: 2006 9月 20 → 2006 9月 22
|Other||55th Society of Polymer Science Japan Symposium on Macromolecules|
|Period||06/9/20 → 06/9/22|
ASJC Scopus subject areas