抄録
A new process for the fabrication of fine scale, high aspect ratio PZT 1-3 composite structures has been developed. In this process, lost mold technique is utilized with a Si mold prepared by deep reactive ion etching (RIE). Due to the high strength and high melting point of Si, PZT sintering under high pressures without removing the mold becomes possible, leading to structures of highly condensed PZT in the precise shape of the mold. The typical PZT structures in this work are periodically arrayed rods 16 μm in diameter, 100 μm in height, resulting in an aspect ratio higher than six. The fabricated structures are to be applied to high resolution micro-ultrasonic transducers in the frequency range of 20 MHz for medical purpose.
| 本文言語 | English |
|---|---|
| ページ | 223-228 |
| ページ数 | 6 |
| 出版ステータス | Published - 1998 1月 1 |
| イベント | Proceedings of the 1998 IEEE 11th Annual International Workshop on Micro Electro Mechanical Systems - Heidelberg, Ger 継続期間: 1998 1月 25 → 1998 1月 29 |
Other
| Other | Proceedings of the 1998 IEEE 11th Annual International Workshop on Micro Electro Mechanical Systems |
|---|---|
| City | Heidelberg, Ger |
| Period | 98/1/25 → 98/1/29 |
ASJC Scopus subject areas
- 制御およびシステム工学
- 機械工学
- 電子工学および電気工学