Synthesis and characterization of plate-like ceria particles for cosmetic application

Y. Minamidate; S. Yin; T. Sato

doi:10.1016/j.matchemphys.2010.05.007

Synthesis and characterization of plate-like ceria particles for cosmetic application

Y. Minamidate, S. Yin, T. Sato

研究成果: Article › 査読

17 被引用数 (Scopus)

抄録

Plate-like cerium oxide particles were successfully prepared by a facile precipitation process of cerium carbonate precursor followed by calcination in air at 400 °C. Ceria particles with the same morphology and slightly decreased particle size compare with those of plate-like cerium carbonate precursor were obtained. The particle size could be controlled by precisely adjusting pH value of the solution. In comparison with commercial ceria nanoparticles, the synthesized plate-like ceria particles showed lower oxidation catalytic activity, higher comfort of use and higher gloss value as well as excellent UV-shielding ability, indicating the potential application as a new cosmetic agent.

本文言語	English
ページ（範囲）	516-520
ページ数	5
ジャーナル	Materials Chemistry and Physics
巻	123
号	2-3
DOI	https://doi.org/10.1016/j.matchemphys.2010.05.007
出版ステータス	Published - 2010 10月 1

ASJC Scopus subject areas

材料科学（全般）
凝縮系物理学

文献へのアクセス

10.1016/j.matchemphys.2010.05.007

他のファイルとリンク

引用スタイル

@article{0726530d46454a0bb769f3798f45db91,

title = "Synthesis and characterization of plate-like ceria particles for cosmetic application",

abstract = "Plate-like cerium oxide particles were successfully prepared by a facile precipitation process of cerium carbonate precursor followed by calcination in air at 400 °C. Ceria particles with the same morphology and slightly decreased particle size compare with those of plate-like cerium carbonate precursor were obtained. The particle size could be controlled by precisely adjusting pH value of the solution. In comparison with commercial ceria nanoparticles, the synthesized plate-like ceria particles showed lower oxidation catalytic activity, higher comfort of use and higher gloss value as well as excellent UV-shielding ability, indicating the potential application as a new cosmetic agent.",

keywords = "Ceramics, Chemical synthesis, Inorganic compounds, Precipitation",

author = "Y. Minamidate and S. Yin and T. Sato",

note = "Funding Information: This research was carried out as one of the projects under the Special Education and Research Expenses on “Post-Silicon Materials and Devices Research Alliance” and the JSPS Asian Core Program “Interdisciplinary Science of Nanomaterials”, JSPS Core University Program (CUP), supported by The Cosmetology Research Foundation , the Research for Promoting Technological Seeds, JST , and a Grant-in-Aid for Science Research (No. 20360293).",

year = "2010",

month = oct,

day = "1",

doi = "10.1016/j.matchemphys.2010.05.007",

language = "English",

volume = "123",

pages = "516--520",

journal = "Materials Chemistry and Physics",

issn = "0254-0584",

publisher = "Elsevier BV",

number = "2-3",

}

TY - JOUR

T1 - Synthesis and characterization of plate-like ceria particles for cosmetic application

AU - Minamidate, Y.

AU - Yin, S.

AU - Sato, T.

N1 - Funding Information: This research was carried out as one of the projects under the Special Education and Research Expenses on “Post-Silicon Materials and Devices Research Alliance” and the JSPS Asian Core Program “Interdisciplinary Science of Nanomaterials”, JSPS Core University Program (CUP), supported by The Cosmetology Research Foundation , the Research for Promoting Technological Seeds, JST , and a Grant-in-Aid for Science Research (No. 20360293).

PY - 2010/10/1

Y1 - 2010/10/1

N2 - Plate-like cerium oxide particles were successfully prepared by a facile precipitation process of cerium carbonate precursor followed by calcination in air at 400 °C. Ceria particles with the same morphology and slightly decreased particle size compare with those of plate-like cerium carbonate precursor were obtained. The particle size could be controlled by precisely adjusting pH value of the solution. In comparison with commercial ceria nanoparticles, the synthesized plate-like ceria particles showed lower oxidation catalytic activity, higher comfort of use and higher gloss value as well as excellent UV-shielding ability, indicating the potential application as a new cosmetic agent.

AB - Plate-like cerium oxide particles were successfully prepared by a facile precipitation process of cerium carbonate precursor followed by calcination in air at 400 °C. Ceria particles with the same morphology and slightly decreased particle size compare with those of plate-like cerium carbonate precursor were obtained. The particle size could be controlled by precisely adjusting pH value of the solution. In comparison with commercial ceria nanoparticles, the synthesized plate-like ceria particles showed lower oxidation catalytic activity, higher comfort of use and higher gloss value as well as excellent UV-shielding ability, indicating the potential application as a new cosmetic agent.

KW - Ceramics

KW - Chemical synthesis

KW - Inorganic compounds

KW - Precipitation

UR - http://www.scopus.com/inward/record.url?scp=77955333689&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=77955333689&partnerID=8YFLogxK

U2 - 10.1016/j.matchemphys.2010.05.007

DO - 10.1016/j.matchemphys.2010.05.007

M3 - Article

AN - SCOPUS:77955333689

SN - 0254-0584

VL - 123

SP - 516

EP - 520

JO - Materials Chemistry and Physics

JF - Materials Chemistry and Physics

IS - 2-3

ER -

Synthesis and characterization of plate-like ceria particles for cosmetic application

抄録

ASJC Scopus subject areas

文献へのアクセス

他のファイルとリンク

フィンガープリント

引用スタイル