Tensile behavior of transient liquid phase bonded ODS ferritic steel joint

Sanghoon Noh, Ryuta Kasada, Akihiko Kimura

研究成果: 書籍の章/レポート/Proceedings査読


The oxide dispersion strengthened (ODS) steel is one of the candidate structural materials for Gen. IV systems and DEMO reactor systems because of its excellent elevated temperature strength, corrosion and radiation resistance. Joining technology development of ODS steels is unavoidable to realize these advanced nuclear systems with huge and complex structures. However, joining of ODS steels with conventional melting-solidification processes is considered to cause detrimental effects on joint regions because of the possible modification of the fine homogeneous microstructure to rather coarse and inhomogeneous microstructure. Therefore, suitable joining techniques need to be developed with such a process that these featured microstructures are reasonably maintained after the processes. In this study, tensile behavior of TLPB ODS steel joint was investigated. Thin pure boron insert material was deposited by electron beam physical vapor deposition (EBPVD) to join ODS steel (Fe-15Cr-2W-0.2Ti-0.35Y2O3) blocks using uni-axial hot press. ODS steel was successfully bonded with free of voids at bonding interface with EBPVD bond. Tensile strength of the joint is similar with the base materials, while total elongation is decreased at 700°C accompanied by fracturing at the joint interface. The fracture is considered to be due to partial discontinuous microstructures aligned along the interface.

ホスト出版物のタイトルZero-Carbon Energy Kyoto 2010
ホスト出版物のサブタイトルProceedings of the Second International Symposium of Global COE Program "Energy Science in the Age of Global Warming-Toward CO2 Zero-emission Energy System"
出版社Springer Verlag
出版ステータス出版済み - 2011


名前Green Energy and Technology


「Tensile behavior of transient liquid phase bonded ODS ferritic steel joint」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。